Abstract
Nanocrystalline γ-Al2O3 and FeCo-Al2O3 nanocomposites containing FeCo alloy nanoparticles well dispersed in the nanocrystalline γ-Al2O3 matrix were successfully obtained by the sol-gel method using aluminum tri-sec-butoxide and iron and cobalt nitrates as precursors. The gels were submitted to high temperature supercritical drying which allowed to obtain aerogels with high surface areas and pore volumes.
Similar content being viewed by others
References
A.C. Pierre and G.M Pajonk, Chem. Rev. 102, 4243 (2002).
M.F. Casula, A. Corrias, and G. Paschina, J. Mater. Chem. 12, 1505 (2002).
J.M. MacLaren, T.C. Schulthness, B.H. Butler, R. Sutton, and M. McHenry, J. Appl. Phys. 85, 4833 (1999).
S. Ohnuma, H.J. Lee, N. Kobayashi, H. Fujimori, and T. Masumoto, IEEE Trans. Magn. 37, 2251 (2001).
D.J. Suh and T.J. Park, Chem. Mater. 9, 1903 (1997).
M. Inoue, M. Kimura, and T. Inui, Chem. Mater. 12, 55 (2001).
M.F. Casula, A. Corrias, and G. Paschina, J. Mater. Res. 15, 2187 (2000).
P.H. Bolt, F.H.P.M. Habraken, and J.W. Geus, J. Solid State Chem. 135, 59 (1998).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Corrias, A., Casula, M.F., Falqui, A. et al. Preparation and Characterization of FeCo-Al2O3 and Al2O3 Aerogels. Journal of Sol-Gel Science and Technology 31, 83–86 (2004). https://doi.org/10.1023/B:JSST.0000047965.22232.53
Issue Date:
DOI: https://doi.org/10.1023/B:JSST.0000047965.22232.53