Abstract
Cell configurations with asymmetric and symmetric electrode geometries and different reference electrode positions were investigated on 50 mm×50 mm planar solid oxide fuel cells (SOFC). The reliability and accuracy of the polarization performance of individual electrodes were studied with respect to the electrode geometry and the reference electrode position. The results indicate that a centrally located reference electrode creates inactive electrolyte regions in the center of the cell, pushing the equipotential lines close to the electrode–electrolyte interface region and thus introducing error in the measurement of polarization performance. The potential of reference electrodes located at the corner of the electrode coating was not stable due to the steam build-up in the reference electrode region. Cells with a symmetric electrode geometry arrangement and reference electrodes located at the side of the working electrodes, away from the receiving end of the fuel and oxidant gases, were found to be suitable for performance evaluation in planar SOFC.
Similar content being viewed by others
Reference
S. Prindahl and M. Mogensen, J. Electrochem. Soc. 145 (1998) 2431.
D. M. Reed, H. U. Anderson and W. Huebner, J. Electrochem. Soc. 143 (1996) 1558.
M. Nagata, Y. Itoh and H. Iwahara, Solid State Ionics 67 (1994) 215.
S. P. Jiang and S. P. S. Badwal, J. Electrochem. Soc. 144 (1997) 3777.
J. Divisek, L. G. J. de Haart, P. Holtappels, T. Lennartz, W. Malléner, U. Stimming and K. Wippermann, J. Power Sources 49 (1994) 257.
A. Khandar, S. Elangovan and M. Liu, Solid State Ionics 52 (1992) 57.
G. Hsieh, T. O. Mason, E. J. Garbozi and L. R. Pederson, Solid State Ionics 96 (1997) 153.
S. P. Jiang, J. G. Love and L. Apateanu, Solid State Ionics 160 (2003) 15.
S. P. Jiang and Y. Ramprakash, Solid State Ionics 116 (1999) 145.
D. Ghosh, G. Wang, R. Brule, E. Tang and P. Huang, in S. C. Singhal and M. Dokiya (Eds), SOFC-VI, PV 99–19, The Electrochemical Society, Pennington, NJ (1999), p. 822.
S. P. Jiang, J. Power Sources 124 (2003) 390.
S. P. Jiang, J. P. Zhang, Y. Ramprakash, D. Milosevic and K. Wilshier, J. Mater. Sci. 35 (2000) 2735.
S. P. Jiang, P. J. Callus and S. P. S. Badwal, Solid State Ionics 132 (2000) 1.
S. B. Adler, B. T. Henderson, M. A. Wilson, D. M. Taylor and R. E. Richards, Solid State Ionics 134 (2000) 35.
S. P. Jiang, J. P. Zhang, L. Apateanu and K. Foger, J. Electrochem. Soc. 147 (2000) 4013.
S. P. Jiang, J. G. Love and S. P. S. Badwal, in J. Nowotny and C. C. Sorrell (Eds), 'Electrical Properties of Oxide Materials' (Trans. Tech. Publications, 1997), p. 81.
S. P. Jiang and J. G. Love, Solid State Ionics 138 (2001) 183.
S. W. Zha, C. R. Xia and G. Y. Meng, J. App. Electrochem. 31 (2001) 93.
O. Kubaschewski and C. B. Alcock, 'Metallurgical Thermochemistry' (Pergamon Press, Oxford, UK, 1979), p. 380.
F. T. Ciacchi, K. M. Crane and S. P. S. Badwal, Solid State Ionics 73 (1994) 49.
T. Kenjo and Y. Kanehira, Solid State Ionics 148 (2002) 1.
J. Fleig and J. Maier, J. Electrochem. Soc. 144 (1997) L302.
S. P. Jiang, J. Electrochem. Soc. 148 (2001) A887.
Y. J. Leng, S. H. Chan, K. A. Khor and S. P. Jiang, J. Appl. Electrochem. 34 (2004) 409.
Y. Jiang, A. V. Virkar and F. Zhao, J. Electrochem. Soc. 148 (2001) A1091.
K. Eguchi, Y. Kunisa, K. Adachi and H. Arai, J. Electrochem. Soc. 143 (1996) 3699.
S. H. Chan, X. J. Chen and K. A. Khor, J. Appl. Electrochem. 31 (2001) 1163.
S. B. Adler, J. Electrochem. Soc. 149 (2002) E166.
J. Winkler, P. V. Hendriksen, N. Bonanos and M. Mogensen, J. Electrochem. Soc. 145 (1998) 1184.
J. Fleig and J. Maier, Solid State Ionics 94 (1997) 199.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jiang, S. Cell Configurations for Performance Evaluation in Planar Solid Oxide Fuel Cells. Journal of Applied Electrochemistry 34, 1045–1055 (2004). https://doi.org/10.1023/B:JACH.0000042671.56349.da
Issue Date:
DOI: https://doi.org/10.1023/B:JACH.0000042671.56349.da