Skip to main content

Composites from Natural Fibers and Soy Oil Resins


The goal of this project is to develop new composites using fibers and resins from renewable resources. The ACRES (Affordable Composites from Renewable Sources) group at the University of Delaware has developed new chemistries to synthesize rigid polymers from plant oils. The resins produced contain at least 50% plant triglycerides and have mechanical properties comparable to commercially available synthetic resins such as vinyl esters, polyesters and epoxies. This project explores the development of all-natural composites by using natural fibers such as hemp and flax as reinforcements in the ACRES resins. Replacing synthetic fibers with natural fibers has both environmental and economic advantages. Unlike carbon and glass fibers, natural fibers are abundantly available from renewable resources. In terms of cost, natural fibers are cheaper than the synthetic alternatives. The natural fibers and plant-based resins have been shown to combine to produce a low cost composite with good mechanical properties. Tensile strength in the 30 MPa range has been obtained for a composite containing about 30 wt% Durafibre Grade 2 flax. The tensile modulus was found to be 4.7 GPa for a 40 wt% flax composite. Similar numbers where obtained for the hemp composites obtained from Hemcore Inc. Composites from renewable resources offer significant potential for new high volume, low cost applications.

This is a preview of subscription content, access via your institution.


  1. McCrum, N. G., Buckley, C. P., and Bucknall, C. B., Principles of Polymer Engineering, 2nd edn, Oxford University Press, New York, 1997.

    Google Scholar 

  2. Devi, L. U., Bhagawan, S. S., and Thomas, S., J.Appl.Polym.Sci.64, 1997, 1739–1748.

    Google Scholar 

  3. Wool, R. P., Kusefoglu, S., Palmese, G., Khot, S., and Zhao, R., High Modulus Polymers and Composites from Plant Oils, U.S. Patent No: 6, 121, 398.

  4. Khot, S., 'Rigid Thermoset Polymers from Acrylated Epoxidized Triglycerides', Thesis, University of Delaware, 1998.

  5. Wool, R. P., Khot, S. H., La Scala, J. J., Williams, G. I., Bunker, S. P., and Morye, S. S., 'Sustainable Composites from Renewable Resources', Proceedings of ACUN-2, P619–627, Sydney, Feb. 2000.

  6. Bandyopadhyay, S., Gellebert, E. P., Silva, V. M., and Underwood, J. H., J.Compos.Mat.23, 1989, 1216–1231.

    Google Scholar 

  7. Peijs, T., van Melick, H. G. H., Garkhail, S. K., Pott, G. T., and Baille, C. A., ECCM-8 Conference, 1998, pp. 119–126.

  8. Bledzki, A. K., Reihmane, S., and Gassan, J., J.Appl.Polym.Sci.59, 1996, 1329–1336.

    Google Scholar 

Download references

Author information

Authors and Affiliations


Rights and permissions

Reprints and Permissions

About this article

Cite this article

Williams, G.I., Wool, R.P. Composites from Natural Fibers and Soy Oil Resins. Applied Composite Materials 7, 421–432 (2000).

Download citation

  • Issue Date:

  • DOI:

  • composites
  • natural fibers
  • soy oil
  • synthesis
  • manufacturing
  • mechanical properties
  • resins