Abstract
The pill-box and block RF windows for millimeter wave (MMW) tubes are presented. The pill-box window is suitable for broadband MMW tubes. And the block window can be used for high power tubes in short MMW. The equivalent circuits for two windows are given. To reach better match characteristics in wider operating bandwidth, the optimum design methods for pill-box and block window in MMW tubes are described in this paper. The testing results show that the theoretic computation is fast and useful accuracy. The design methods possess references value to designer for MMW tubes.
Similar content being viewed by others
References
B. Braazer, et al, 100 W 18-40 GHz traveling wave tube, IEDM-87, pp.466-469
D. Gallasher, et al, Millimeter-wave folded waveguide TWT developed at Northrop Grumman, IEDM 1997, pp.161
A. J. Theiss, et al, An integral-polepiece folded-waveguide slowwave circuit for high power millimeter wave TWTs, IEDM 1993, pp.149-151
D. B. Lyon, et al, Litton folded-waveguide high-power millimeter-wave TWTs, IEDM 1994, pp.918-920
Electronic Tube Design Handbook Editor Committee, High Power Klystron Design Handbook (Sinitic), 1979
J. B. Kennedy, et al, Study of 42 and 85 GHz Coupled Cavity Traveling Wave Tube for Space Use, NAS 3-19701, W-06553, June 1977
N. Marcuvitz, Waveguide Handbook, New York, Mc Graw-Hill, 1951
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Liu, S. Optimum Design for RF Windows in Millimeter Wave High Power Tubes. International Journal of Infrared and Millimeter Waves 24, 629–638 (2003). https://doi.org/10.1023/A:1023351329287
Issue Date:
DOI: https://doi.org/10.1023/A:1023351329287