References
G. A. Stepanov, “Making blanks for flanges on welded inserts made of austenitic steels,” Khim. Neftegaz. Mashinostr.,No. 4, 45-46 (2001).
P. D. Odesskii, N. V. Vedyakov, and V. M. Gorpichenko, Preventing Brittle Failure in Metal Load-Bearing Structures[in Russian], SP Intermet Engineering, Moscow (1998).
Yu. P. Solntsev and G. A. Stepanov, Constructional Steels and Alloys for Low Temperatures [in Russian], Metallurgiya, Moscow (1985).
V. M. Blinov, M. A. Kablukovskaya, Yu. P. Liberov, G. A. Stepanov, and V. I. Skol'tsov, “Few-cycle fatigue in nonmagnetic steels 40G18N13F and 35Kh14G16N10FR at +20 and -196°C,” Izv. AN SSSR, Metally, No. 4, 107-111(1981).
G. A. Stepanov and E. A. Kivi, “Methods of testing for thermal fatigue at negative temperatures,” Zavod. Laborat.,No. 11, 1374-1376 (1972).
M. N. Stepnov, Statistical Methods of Processing Mechanical Test Data: Handbook [in Russian], Mashinostroenie, Moscow (1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Stepanov, G.A., Skol'tsov, V.I. Thickness Distribution of Low-Temperature Parameters for AMg5 Alloy Plates. Chemical and Petroleum Engineering 38, 699–702 (2002). https://doi.org/10.1023/A:1023303001218
Issue Date:
DOI: https://doi.org/10.1023/A:1023303001218