Abstract
This research develops a methodology for the intelligent remote monitoring and diagnosis of manufacturing processes. A back propagation neural network monitors a manufacturing process and identifies faulty quality categories of the products being produced. For diagnosis of the process, rough set is used to extract the causal relationship between manufacturing parameters and product quality measures. Therefore, an integration of neural networks and a rough set approach not only provides information about what is expected to happen, but also reveals why this has occurred and how to recover from the abnormal condition with specific guidelines on process parameter settings. The methodology is successfully implemented in an Ethernet network environment with sensors and PLC connected to the manufacturing processes and control computers. In an application to a manufacturing system that makes conveyor belts, the back propagation neural network accurately classified quality faults, such as wrinkles and uneven thickness. The rough set also determined the causal relationships between manufacturing parameters, e.g., process temperature, and output quality measures. In addition, rough set provided operating guidelines on specific settings of process parameters to the operators to correct the detected quality problems. The successful implementation of the developed methodology also lays a solid foundation for the development of Internet-based e-manufacturing.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Bell, D. A. and Guan, J. W. (1998) Computational methods for rough classification and discovery. Journal of the American Society for Information Science, 49(5), 403-414.
Cios, K. J., Pedrycz, W. and Swiniarski, R. W. (1998) Data Mining Methods for Knowledge Discovery, Kluwer Academic Publishers, Boston, MA.
Fu, L. M. (1998) A neural network model for learning domain rules based on its activation function characteristics. IEEE Transactions on Neural Networks, 9(5), 787-795.
Fu, L. M. (1999) Knowledge discovery based on neural networks. Communications of the ACM, 42(11), 47-50.
Fu, L. M. and Shortliffe, E. H. (2000) The application of certainty factors to neural computing for rule discovery. IEEE Transactions on Neural Networks, 11(3), 647-657.
Hou, T. H. and Lin, L. (1995) Using neural networks for the automatic monitoring and recognition of signals in manufacturing processes, in H. R. Parsaei and M. Jamshidi (eds), Design and Implementation of Intelligent Manufacturing Systems, Prentice Hall Inc., pp. 141-160.
Han, J. and Kamber, M. (2001) Data Mining: Concepts and Techniques, Morgan Kaufmann Publishers, San Francisco.
ITIS (2000) Reports of Technology Status and Market Trend in Electrical Industry and Mechanical Industry, Industrial Technology Information Service Ltd., http://www.itis.org.tw.
Hui, S. C. and Jha, G. (2000) Data mining for customer service support. Information and Management, 38, 1-13.
Kandil, N., Sood, V. K., Khorasani, K. and Patel, R. V. (1991) Fault identification in an AC-DC transmission system using neural networks. Power Industry Computer Application Conference Proceedings, pp. 285-292.
Kusiak, A. (2000) Computational Intelligence in Design and Manufacturing, John Wiley & Sons, Inc.
Lai, L. L. (1997) Application of neural networks to fault classification and protection, Proceedings of the 4th International Conference on Advances in Power System Control, Operation and Management, APSCOM-97, pp. 72-76.
Lee, J. (2000) Industry/University Cooperative Research Center on Intelligent Maintenance System (IMS), Unpublished Report, University of Wisconsin at Milwaukee and University of Michigan at Ann Arbor.
Lingras, P. J. and Yao, Y. Y. (1998) Data mining using extensions of the rough set model. Journal of the American Society for Information Science, 49(5), 415-422.
Marko, K. A., Feldkamp, L. A. and Puskorius, G. V. (1990) Automotive diagnosis using trainable classifiers: statistical testing and paradigm selection. IJCNN-90, 1, 33-38.
MoRwald, R. and Kaplan, W. A. (1999) Molders can achieve greater quality by raising machine integration. Modern Plastics, 29(2), 63-66.
Pao, Y. H. (1989) Adaptive Pattern Recognition and Neural Networks, Addison-Wesley Publishing Company, Inc., Reading, MA.
Pawlak, Z. (1991) Rough Sets: Theoretical Aspects of Reasoning About Data, Kluwer Academic Publishers, Boston.
Polkowski, S. L. and Skowron, A. (1998) Rough Sets in Knowledge Discovery 1: Methodology and Applications, Physical-Verlag, Pineridge.
Polkowski, S. L. and Skowron, A. (1998) Rough Sets in Knowledge Discovery 2: Applications, Case Studies and Software Systems, Physical-Verlag, Pineridge.
Shen, L., Tay, F. E. H., Qu, L. and Shen, Y. (2000) Fault diagnosis using rough sets approach. Computers in Industry, 43(1), 61-72.
Vaughn, M. L. (1999) Derivation of the multilayer perceptron weight constraints for direct network interpretation and knowledge discovery. Neural Networks, 12(9), 1259-1271.
Wang, D. D., Yang, D., Xu, J. and Xu, K. (1996) Computational intelligence based machine fault diagnosis, in Proceedings of the IEEE International Conference on Industrial Technology, 465-469.
Ziarko, W. (1999) Discovery through rough set theory. Communications of the ACM, Association for Computing machinery, 42(11), 55-57.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hou, TH.(., Liu, WL. & Lin, L. Intelligent remote monitoring and diagnosis of manufacturing processes using an integrated approach of neural networks and rough sets. Journal of Intelligent Manufacturing 14, 239–253 (2003). https://doi.org/10.1023/A:1022911715996
Issue Date:
DOI: https://doi.org/10.1023/A:1022911715996