Abstract
An aluminum-silicon-chromium powder (ASC) extracted from waste gases in synthetic rubber production is used as an addition to kaolin-based ceramics, and its effect on the kinetics of sintering, compressive strength, and phase composition of mullite-corundum and corundum ceramic materials is studied. The strength of ceramic materials is mainly determined by the amount and composition of the mullite component. The effect of mechanochemical activation in an aqueous medium on the physicochemical properties of the mullite-corundum materials is studied.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
S. E. Porozova and A. M. Beklemyshev, “High-porosity ceramic material for trapping metal sublimates. Noble and rare metals, ” in: Coll. of Rep. to the Int. Conf. “Noble and rare metals. NRM-94, ” Donetsk, 19-22 September, 1994 [in Russian], Donetsk (1994), p. 30.
V. N. Antsiferov, A. M. Beklemyshev, S. E. Porozova, et al., “RF Patent No. 1820850. A filter for trapping metal sublimates from the waste gases of smeltering furnaces, ” Byull. Izobr., No. 21 (1993).
L. P. Baranov, T. S. Golodnova, P. I. Kutuzov, et al., “Efficient units for sanitary treatment of industrial gases, ” in: Proceed. of the Sci. and Eng. Int. Conf. “Realization of regional programs on prospective industrial development in Russia, ” 13-15 May, 1999, Sterlitamak [in Russian], Sterlitamak (1999), pp. 73-77.
L. P. Baranov, T. S. Golodnova, and N. N. Golodnov, “RF Patent No. 2034881. An abrasive, ” Byull. Izobr., No. 13 (1995).
M. T. Mukhamedzhanova and A. P. Irkakhodzhaeva, “Ceramic mixtures using waste products of nonferrous metallurgy, ” Steklo Keram., No. 5-6, 41-42 (1994).
N. A. Sirazhiddinov, A. M. Alikulov, M. M. Azizkhodzhaeva, et al., “Mining and metallurgy slags in the production of ceramic plates, ” Steklo Keram., No. 5, 4-6 (1993).
N. A. Mikhailova, I. T. Akhmerov, and É. T. Vovkotrub, “Decorative coatings for ceramics using industrial by-products in the Ural region, ” Steklo Keram., No. 3, 20-21 (1997).
V. P. Barzakovskii (ed.), Constitutional Diagrams for Silicate Systems. Handbook. Issue 3, Ternary Silicate Systems [in Russian], Nauka, Leningrad (1972).
Diffraction Data File ASTM. Inorganic Index to the Powder Diffraction File ASTM, Philadelphia (1969).
S. S. Ordan'yan, K. P. Andreev, and E. K. Stepanenko, “Mechanical activation by vibratory grinding and its effect on the sintering and properties of a mullite ceramic, ” Zh. Prikl. Khim., Issue 12, 1978-1982 (1998).
V. N. Antsiferov, S. E. Porozova, V. Ya. Bekker, et al., “A comparative characterization of kaolins from the Prosyanovskoe and Kyshtymskoe deposits mechanochemically activated in an aqueous medium, ” Ogneup. Tekh. Keram., No. 10, 31-34 (2001).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Antsiferov, V.N., Golodnova, T.S., Porozova, S.E. et al. Use of Waste Materials from the Production of Synthetic Rubber for Preparing Aluminosilicate Ceramics. Refractories and Industrial Ceramics 43, 299–302 (2002). https://doi.org/10.1023/A:1022338616488
Issue Date:
DOI: https://doi.org/10.1023/A:1022338616488