Abstract
Nitriding is a common method for improving the hardness, mechanical properties, wear and corrosion resistance of metals. Laser nitriding of metals is an efficient process, where the irradiation of surfaces in air or nitrogen atmospheres with short laser pulses leads to a fast take-up of nitrogen into the irradiated surfaces. This process has been extensively investigated for pure iron, but usually, no tools or functional parts are made of pure iron. Mainly steel or cast iron is used as a base material. Therefore, when looking for technical applicability, also the influence of alloying elements on the laser nitriding process is of great interest. Besides the pure iron various carbon steels and an austenitic stainless steel were studied in laser nitriding experiments in order to investigate the influence of the material itself. Here, the process is investigated via Conversion Electron and X-ray Mössbauer Spectroscopy (CEMS and CXMS), Resonant Nuclear Reaction Analysis (RNRA), and X-Ray Diffraction (XRD). It appears that carbon steels are even better suited for the laser nitriding process than pure iron, and the laser nitriding also works efficiently for the stainless steel which is normally difficult to be nitrided.
Similar content being viewed by others
References
Schaaf, P., Emmel, A., Illgner, C., Lieb, K.-P., Schubert, E. and Bergmann, H. W., Mater. Sci. Eng. A, 197 (1995), L1.
Schaaf, P., Illgner, C., Niederdrenk, M. and Lieb, K.-P., Hyp. Interact. 95 (1995), 199.
Schaaf, P., Hyp. Interact. 111 (1998), 113.
Schaaf, P., Landry, F., Neubauer, M. and Lieb, K.-P., Hyp. Interact. 113 (1998), 429.
Schaaf, P., Landry, F. and Lieb, K.-P., Appl. Phys. Lett. 74(1) (1999), 153.
Illgner, C., Schaaf, P., Lieb, K.-P., Queitsch, R. and Barnikel, J., J. Appl. Phys. 83 (1998), 2907.
Landry, F., Schaaf, P., Neubauer, M. and Lieb, K.-P., Appl. Surf. Sci. 138–139 (1999), 266.
Landry, F., Lieb, K.-P. and Schaaf, P., J. Appl. Phys. 86 (1999), 168.
Schaaf, P., Progress in Materials Science 47(1) (2002), 1.
Landry, F. and Schaaf, P., GöMOSS – Windows Fitprogram for the Analysis of Mössbauer Spectra, 1998.
Uhrmacher, M., Pampus, K., Bergmeister, F. J., Purschke, D. and Lieb, K.-P.,Nucl. Instr. Methods B 9 (1985), 234.
Landry, F. and Schaaf, P. Nucl. Instr. Methods B 179 (2001), 262.
Spies, H.-J. and Vogt, F., Härterei-Technische Mitteilungen 52 (1997), 342.
Spies, H.-J., Schaaf, P. and Vogt, F., Materialwissenschaft und Werkstofftechnik 29 (1998), 588.
Mändl, S., Günzel, R. Richter, E. and Moeller, W., Surface and Coatings Technology 100– 101(1–3) (1998), 367.
Nadutov, V. M., Mater. Sci. Eng. A 254 (1998), 234.
Oda, K., Umezu, K. and Ino, H., J. Phys.: Condens. Matter 2 (1990), 10 147.
Foct, J., Rochegude, P. and Hendry, A., Acta Metall. 36 (1988), 501.
Han, M., Landry, F. and Schaaf, P., Appl. Phys. A 69 (1999), S795.
Rixecker, G., Schaaf, P., and Gonser, U., J. Phys. D, 26 (1993), 870.
Schaaf, P., Wiesen, S. and Gonser, U., Acta Metall. 40 (1992) 373.
Kunze, J., Härterei-Technische Mitteilungen 51 (1996), 348.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Schaaf, P., Landry, F., Han, M. et al. Laser Nitriding of Iron, Stainless Steel, and Plain Carbon Steel Investigated by Mössbauer Spectroscopy. Hyperfine Interactions 139, 307–314 (2002). https://doi.org/10.1023/A:1021283624384
Issue Date:
DOI: https://doi.org/10.1023/A:1021283624384