Abstract
A direct observation wear machine (DOWM) has been built thatallows a lubricated ball sample to be observed through a rotatingsapphire countersurface while being slid at engineering speedsand loads. By comparing changes in the scar size with changes inthe appearance it is possible to identify pro and antiwearprocesses.
Similar content being viewed by others
References
J.S. Sheasby and G.R. Mount, Wear 105 (1985) 235.
J.S. Sheasby, T.A. Caughlin and J.J. Habeeb, Wear 150 (1991) 247.
P.M.E. Cann, G.J. Johnston and H.A. Spikes, in: Proc. Inst. Mech Eng. Int. Conf. Tribology (London, 1987) p. 543.
H.C. Stinton, H. A. Spikes and A. Cameron, ASLE Trans. 25 (1981) 355.
J.S. Sheasby and Z. Nisenholz, Tribology Trans. 36 (1993) 399.
J.S. Sheasby and T.A. Caughlin, in: 25th Leeds-Lyon Symposium on Tribology, eds. D. Dowson et al. (Elsevier, Amsterdam, 1993) p. 277.
J.M. Georges, Tribol. Series 7 (1982) 729.
Rights and permissions
About this article
Cite this article
Sheasby, J., Jennings, M. Investigating boundary lubrication with a directobservation wear machine. Tribology Letters 3, 95–98 (1997). https://doi.org/10.1023/A:1019119424701
Issue Date:
DOI: https://doi.org/10.1023/A:1019119424701