Abstract
In this paper design criteria used in the development of new highly active materials for high‐temperature catalytic combustion of natural gas are presented with selected examples. It is the composition and structure of a given material which determine the activity. Specific surface area plays a secondary role.
Similar content being viewed by others
References
J. Zernike, Chem. Weekbl. 63 (1967) 321.
W.C. Pfefferle, J. Energy 2 (1978) 142.
R. Prasad, L.A. Kennedy and E. Ruckenstein, Catal. Rev. Sci. Eng. 26 (1984) 1.
D.L. Trimm, Appl. Catal. 7 (1984) 249.
L.D. Pfefferle and W.C. Pfefferle, Catal. Rev. Sci. Eng. 26 (1987) 219.
H. Arai and M. Machida, Catal. Today 10 (1991) 81.
M.F.M. Zwinkels, S.G. Järäs and P.G. Menon, Catal. Rev. Sci. Eng. 35 (1993) 319.
J. Lee and D.L. Trimm, Fuel Process. Technol. 42 (1995) 339.
W.S. Blazowski and D.E. Walsh, Combust. Sci. Technol. 10 (1975) 233.
R. Prasad, L.A. Kennedy and E. Ruckenstein, Combust. Sci. Technol. 22 (1980) 271.
J.G. McCarty, R.H. Lamoreaux and M.A. Quinlan, in: Proc. 1989 Int. Gas Res. Conf. (1989) p. 232.
H. Arai, T. Yamada, K. Eguchi and T. Seiyama, Appl. Catal. 26 (1986) 265.
J.G. McCarty and H. Wise, Catal. Today 8 (1990) 231.
J. Kirchnerova, D. Klvana, J. Vaillancourt and J. Chaouki, Catal. Lett. 21 (1993) 77.
D. Klvana, J. Vaillancourt, J. Kirchnerova and Chaouki, J. Appl. Catal. A 109 (1994) 181.
M. Machida, K. Eguchi and H. Arai, Chem. Lett. (1987) 767.
M. Machida, K. Eguchi and H. Arai, J. Catal. 123 (1990) 477.
G. Groppi, M. Belloto, C. Cristiani, P. Forzatti and P.L. Villa, Appl. Catal. A 104 (1993) 101.
J.J. Spivey, B.W.-L. Jang, G. Marcelin, M. Öcal, R. Oukaci and R.V. Serauskas, in: Proc. 1995 Int. Gas Res. Conf., Nice, November 1995, p. 574.
D. Klvana, P. Gauthier, J. Delval, J. Kirchnerova and J. Chaouki, Canad. J. Chem. Eng. 75 (1997) 509.
J. Kirchnerova and D. Klvana, Solid State Ionics 123 (1999) 307.
J. Kirchnerova and A.D. Pelton, Solid State Ionics 93 (1997) 159.
J.H. Lunsford, Angew. Chem. Int. Ed. Engl. 34 (1995) 970.
J.G. McCarty, D.L. Hildenbrand, K.H. Lau, B. Wood, J.A. Kezerle and D.A. Scarpiello, in: Proc. 1995 Int. Gas Res. Conf., Cannes, November 1995, p. 607.
C.W. Bale, A.D. Pelton and W.T. Thomson, Facility for the Analysis of Chemical Thermodynamics, F*A*C*T2.1-User Manual, Ecole Polytechnique de Montreal/Royal Military College, Canada (1996); http://www.crct.polymtl.ca.
D.M. Lowe, M.I. Gusman and J.G. McCarty, in: Preparation of Catalysts VI, Stud. Surf. Sci. Catal., Vol. 91, eds. G. Poncelet, J. Martens, B. Delmont, A.P. Jacobs and P. Grange (Elsevier, Amsterdam, 1995) p. 445.
P.E. Marti, M. Maciejewski and A. Baker, in: Preparation of Catalysts VI, Stud. Surf. Sci. Catal., Vol. 91, eds. G. Poncelet, J. Martens, B. Delmont, A.P. Jacobs and P. Grange (Elsevier, Amsterdam, 1995) p. 617.
M. Machida, K. Eguchi and H. Arai, J. Catal. 103 (1987) 385.
M. Daturi, G. Busca, G. Groppi and P. Forzatti, Appl. Catal. B 12 (1997) 325.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kirchnerova, J., Klvana, D. Design criteria for high‐temperature combustion catalysts. Catalysis Letters 67, 175–181 (2000). https://doi.org/10.1023/A:1019069622476
Issue Date:
DOI: https://doi.org/10.1023/A:1019069622476