Abstract
The aim of this paper is to develop a new methodology of analysis and evaluation of Flexible Manufacturing System (FMS) design configurations. It examines the use of an integrated, systemic, global and user oriented approach for the complex problem of selecting among several configuration alternatives the most suitable for a specific case. The methodology is implemented using the Decision Support System framework, offering an objective tool to help managers and engineers during the design stage of the development cycle of these manufacturing systems. A case study illustrates the effectiveness of the developed methodology.
Similar content being viewed by others
References
P. Afentakis, A model for layout design in FMS, in: Flexible Manufacturing Systems: Methods and Studies, A. Kusiak, ed., North-Holland, 1992, pp. 133-150.
A.A. Aly and M. Subramaniam, Design of an FMS decision support system, Int. J. Prod. Res. 31(1993)2252 -2273.
A. Arbel and A. Seidmann, Performance evaluation of flexible manufacturing systems, IEEE Trans. Syst., Man, Cyber. 14(1984)606 - 617.
G. Azzone and U. Bertelè, Techniques for measuring the effectiveness of automation and manufacturing systems, Control and Dynamic Systems 48(1991)1 - 45.
M. Barad, Impact of some flexibility factors in FMSs - a performance evaluation approach, Int. J. Prod. Res. 30(1992)2587 - 2602.
C.E. Bolden, C-BAT: Cost-benefit analysis a demonstration case study, in: Proceedings of the 5th Annual ESPRIT Conference, Brussels, Belgium, 1988, pp. 1561 - 1570.
D. Borenstein, Integrated decision support system for flexible manufacturing system design, Ph.D. Thesis, University of Strathclyde, Glasgow, 1995.
D. Borenstein, IDSSFLEX tutorial, Working Paper 95/1, Department of Management Science, University of Strathclyde, Glasgow, 1994.
A. Bosman and H.G. Sol, Knowledge representation and information system design, in: Knowledge Representation for Decision Support, L.B. Methlie and R.H. Sprague, eds., Elsevier, 1983, pp. 81 -91.
D.E. Brown and G. Anadalingam, An expert system for design of flexible manufacturing systems, in: Proceedings of the 1986 IEEE International Conference on Systems, Man and Cybernetics, Atlanta, Georgia, 1986, pp. 852 - 857.
J.R. Canada, Non-traditional method for evaluating CIM opportunities assigns weights to intangibles, Industrial Engineering (March, 1986)66 - 71.
A. Carrie, Simulation of Manufacturing Systems, Wiley, London, 1988.
F.T. Curtin, New cost methods needed for manufacturing technology, AMA Forum 73(1984)29 -34.
W. Edwards and J.R. Newman, Multiattribute Evaluation, Sage Publications, California, 1982.
P. Floss and J. Talavage, A knowledge-based design assistant for intelligent manufacturing systems, J. Manufacturing Syst. 9(1990)87 - 102.
J. Haddock, A simulation generator for flexible manufacturing systems design and control, IEE Transactions 20(1988)22 - 31.
C.M. Harmonovsky, Preliminary system design for flexible manufacturing systems (FMS): Essential elements, analysis tools, and techniques, Control and Dynamic Systems 46(1991)83 - 122.
R. Kaplan, Must CIM be justified by faith alone?, Harv. Bus. Rev. (March-April, 1987)87 - 95.
R. Kaplan, Measuring manufacturing performance: A new challenge for managerial accounting research, The Accounting Review (October, 1983)686 - 705.
R.L. Keeney and H. Raiffa, Decisions with Multiple Objectives: Preferences and Value Trade-offs, Wiley, New York, 1976.
V.P. Kochikar and T.T. Narendram, A framework for assessing the flexibility of manufacturing systems, Int. J. Prod. Res. 30(1992)2873- 2895.
P. Kouvelis, Design and planning problems in flexible manufacturing systems: A critical review, J. Intel. Manufacturing 3(1992)75 - 99.
M. Mandelbaum and P.H. Brill, Examples of measurement of flexibility and adaptativity in manufacturing systems, J. Opl. Res. Soc. 40(1989)603 - 609.
J.M. Mellichamp and A.F.A. Wahab, An expert system for FMS design, Simulation 48(1987) 201 - 208.
M. Melman and M. Livny, Distributed system simulation of a flexible manufacturing system, in: Proceedings of JSST International Conference, Osaka, Japan, 1986, pp. 61 - 69.
J.R. Meredith and M. Hill, Justifying new manufacturing systems: A managerial approach, Sloan Mgmt. Sci. 34(1987)1231 - 1251.
J.R. Meredith and N.C. Suresh, Justification techniques for advanced manufacturing technologies, Int. J. Prod. Res. 24(1987)1043 - 1057.
Y. Narahari and N. Viswanadham, A Petri net approach to the modelling and analysis of flexible manufacturing systems, Annals Oper. Res. 3(1985)449 - 472.
C.S. Park and G.P. Shap-Bette, Advanced Engineering Economics, Wiley, New York, 1990.
C.S. Park and Y.K. Son, An economic evaluation model for advanced manufacturing systems, The Engineering Economist 34(1988)1 - 26.
M.E. Porter, Competitive Strategy: Techniques for Analyzing Industries and Competitor, The Free Press, New York, 1980.
P.L. Primorose and C.C. Brown, FMS evaluation: A case study, The FMS Magazine 5(1987)131 - 132.
R.S. Sawhney, An activity-based approach for evaluating strategic investments in manufacturing companies, J. Manufacturing Syst. 10(1991)353-367.
J.J. Solberg, CAN-Q user's guide: The optimal planning of computerized manufacturing systems, Technical Report 9, School of Engineering, Purdue University, West Lafayette, 1980.
Y.K. Son, A cost estimation model for advanced manufacturing systems, Int. J. Prod. Res. 29 (1991)441 - 452.
Y.K. Son, A decision framework for modern manufacturing economics, Int. J. Prod. Res. 29(1991) 2483 - 2499.
Y.K. Son and L.-F. Hsu, A method of measuring quality costs, Int. J. Prod. Res. 29(1991)1785-1794.
A. Stam and M. Kuula, Selecting a flexible manufacturing system using multiple criteria analysis, Int. J. Prod. Res. 29(1991)803-820.
K.E. Stecke, Formulation and solution of nonlinear integer production planning problems for flexible manufacturing systems, Mgmt. Sci. 29(1991)273 - 288.
W.G. Sullivan, Models IEs can be used to include strategic, non-monetary factors in automation decisions, Industrial Engineering 18(1986)42 - 50.
W.G. Sullivan, A new paradigm for engineering economy, The Engineering Economist 36(1991) 187 - 200.
N.C. Suresh and J.R. Meredith, Justifying multimachine systems: An integrated strategic approach, J. Manufacturing Syst. 4(1985)117 - 134.
R. Suri, New techniques for modelling and control of flexible automated manufacturing systems, in: Proceedings of the IFAC 8th Triennial World Congress, Vol. 14, Kyoto, Japan, 1981.
R. Suri and C.K. Whitney, Decision support requirements in flexible manufacturing, J. Manufacturing Syst. 3(1984)61 - 69.
J.J. Talavage and R. Shodhan, Automated development of design and control strategy for FMS, Int. J. Comp.- Int. Manufacturing 5(1992)355 - 348.
K.P. Valavanis, On the hierarchical modelling analysis and simulation of flexible manufacturing systems with extended Petri nets, IEEE Trans. Syst., Man, Cyber. 20(1990)94 - 110.
M. Zeleny, Multiple Criteria Decision Making, McGraw-Hill, New York, 1982.
Rights and permissions
About this article
Cite this article
Borenstein, D. Intelligent decision support system for flexible manufacturing system design. Annals of Operations Research 77, 129–156 (1998). https://doi.org/10.1023/A:1018969126418
Issue Date:
DOI: https://doi.org/10.1023/A:1018969126418