Abstract
Mo alloying has been carried out on a Fe–Cr alloy by electron beam irradiation. It is shown that a Mo surface enrichment can be obtained in the range 2–8 at %. Scanning and transmission electron microscopy, X ray microanalysis and electron energy loss spectroscopy have been used to investigate the microstructures obtained after irradiation. Mo–Cr carbide and intermetallic X phase have been identified after alloying. The intermetallic phase is preferentially formed when the Mo content increases. It is concluded from electrochemical studies and potentiostatic attacks that the active and transpassive dissolution rates are closely related to the Cr content in the ferritic phase. This work must be also regarded as a first step towards the surface preparation of 316 S. S. by Mo incorporation to 304 S. S.
Similar content being viewed by others
References
S. C. TJONG and J. B. MALHERBE,App. Surf. Sci. 44 (1990) 179.
S. SCHILLER and S. PANZER Annual Review of Materials Science, edited by R. A. Huggins, J. A. Giordmaine and J. B. Wachtman, (Annual Reviews Inc, Palo Alto, California, 1988) pp. 121–140.
R. ZENKER, Surface Engineering with High Energy Beams, edited by A. P. Loureiro, O. Conde, L. Guera-Rosa and R. Vilar, (Trans. Tech. Publications, Brookfield, 1990) pp. 53–67.
D. G. RICKERBY, in ASM Heat Treatment and Surface Engineering Conference, 22-24 May, 1991 edited by E. J. Mittemeijer (Trans. Tech. Publications, Amsterdam, Zurich, 1992) p. 477.
T. R. TUCKER, J. D. AYERS and R. J. SCHAEFER, Laser and Electron Beam Processing of Materials, edited by C. W. White and P. S. Bercy, (Academic Press, New York, 1980) pp. 760–767.
A. IWATA, A. TAUQIR and P. R. STRUTT, Science and Technology of Rapidly Quenched Alloys, edited by M. Tenhover, W. L. Johnson and L. E. Tanner, Vol. 80, MRS Conference Publications (MRS, Pittsburgh, 1987) pp. 239–244.
S. TOSTO and F. NENCI, Mémoires et Études Scientifiques, Revue de Métallurgie, Juin 1987, pp. 311–320.
S. TOSTO, P. VANHILLE and C. VIGNAUD,Surf. and Coatings Technol. 58 (1993) 137.
S. TOSTO, F. NENCI and HU JIANDONG, in J. Mater. Sci. 29 (1994) 5852.
V. LAZARESCU, O. RADOVICI and M. VASS,Appl Surf. Sci. 55 (1992) 297.
T. S. SAMPATH KUMAR and M. S. HEGDE,Appl. Surf. Sci. 20 (1985) 290.
P. KOFSTAD, High Temperature Corrosion, (Elsevier Applied Science Pub. Ltd, London 1988) p. 265.
S. TOSTO and S. GIRARDI,Mat. Chem. 7 (1982) 537.
T. B. MASSALSKI Binary Alloy Phase Diagrams, (American Society for Metals, Metals Park, Ohio 1986) pp. 574–576
S. TAKEDA and N. YUKAWA,J. Japan Inst. Metals,21 (1957) 275.
C. VIGNAUD, M. KEDDAM, F. PILLIER, S. TOSTO and F. NENCI, Materials Science Forum, Vol 126-128. (1993) pp. 499–502.
I. EPELBOIN, M. KEDDAM, O. R. MATTOS and H. TAKENOUTI Corros. Sci. 19 (1979) 1105.
M. KEDDAM, O. R. MATTOS and H. TAKENOUTI,Electrochim. Acta 31 (1986) 1147, 1159.
P. LACOMBE, B. BAROUX and G. BERANGER, “Stainless Steels”, (Editions de Physique, France, 1991) p. 26.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
KEDDAM, M., NENCI, F., PILLIER, F. et al. Mo surface enrichment on a Fe–Cr alloy by electron beam irradiation. Journal of Materials Science 32, 3613–3620 (1997). https://doi.org/10.1023/A:1018626329051
Issue Date:
DOI: https://doi.org/10.1023/A:1018626329051