Abstract
The effect of recycling on microstructure and mechanical properties has been evaluated for injection-moulded poly-ether-ether-ketone (PEEK) composites reinforced with 10% and 30% short carbon fibres. Microstructure characterization was carried out by determining fibre length distributions, PEEK molecular weight, and by SEM observations of fracture surfaces before and after processing. These studies reveal degradation of fibres and matrix during recycling. Tensile Young’s modulus and strength, as well as impact strength reductions are presented for recycled composites.
Similar content being viewed by others
References
K. B. Abbas, Polymer 22 (1981) 836.
P. Sanchez, P. M. Remiro and J. Nazabal, Polym. Eng. Sci. 32 (1992) 861.
K. B. Abbas, ibid. 20 (1980) 376.
P. Singh and M. R. Kamal, Polym. Compos. 10 (1989) 344.
P. A. O’Conell and R. A. Duckett, Compos. Sci. Technol 42, (1991) 320.
M. Akay and D. Barkley, J. Mater. Sci. 26 (1991) 2731.
R. Von Turkovich and L. Erwin, Polym. Eng. Sci. 23 (1983) 743.
V. P. Gupta, R. K. Mittal, P. K. Sharma, G. Mennig and J. Wolters. Polym. Compos. 10 (1989) 16.
M. Folkes and W. K. Wong, Polymer 28 (1987) 1309.
C. M. Hsiung and J. L. White, Polym. Eng. Sci. 10 (1990) 967.
A. K. Mishra and J. M. Schultz, Polym. Compos. 12 (1991) 169.
E. Davaux and B. Chabert, Polym. Commun. 32 (1991) 464.
J. R. Sarasua, P. M. Remiro and J. Pouyet, Polym. Compos. 17 (1996) 468.
J. Devaux, D. Delimoy, D. Daoust, R. Legras, J. P. Mercier, C. Strazielle and E. Nield, Polymer 26 (1985) 194.
J. R. Sarasua, P. M. Remiro and J. Pouyet, J. Mater. Sci. 30 (1995) 3502.
R. Bailey and B. Rzepka, Int. Polym. Process. 6 (1991) 1.
J. R. Sarasua, P. M. Remiro and J. Pouyet, Composites 2 (1994) 24.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
SARASUA, J.R., POUYET, J. Recycling effects on microstructure and mechanical behaviour of PEEK short carbon-fibre composites. Journal of Materials Science 32, 533–536 (1997). https://doi.org/10.1023/A:1018598610260
Issue Date:
DOI: https://doi.org/10.1023/A:1018598610260