Abstract
Glass-ceramic was produced by adding limestone to sewage sludge incinerated ash. Black glass was produced by melting a blended ash batch at 1450°C. For nucleation, this glass was reheated at 800°C for 1 h, and reheated at 1100°C for 2 h to form glass-ceramic. The main components of sewage sludge incinerated ash are SiO2 and Al2O3. Because small amounts of Fe2O3, sulfur and carbon are included, the addition of limestone alone can generate the crystal nucleant, FeS, to form anorthite (CaO·Al2O3·2SiO2) crystal. The glass-ceramic showed superior characteristics of high strength and acid resistance for use in construction materials.
Similar content being viewed by others
References
Tokyo Metropolitan Sewerage Bureau, “Annual Technical Report”.
Y. TANAKA and T. KATO, J. Ceram. Soc. Jpn 86 (1978) 559.
E. M. RABINOVICH, in “The Fifth Conference on Mineral Engineering”, Israel (1980) p. 108.
Idem, Adv. Ceram. 4 (Nucl. Cryst. Glasses) (1982) 334.
Y. MA and B. SUN, J. Non-Cryst. Solids 52 (1982) 541.
M. PELINO, C. CANTALINI, F. VEGLIO and P. P. PLESCIA, J. Mater. Sci. 29 (1994) 2087.
N. M. PAVLUSHKIN, “Osnovy Tekhnologii Sitallov (Introduction to Technology of Glass-Ceramics)” (Stroiizdat, Moscow, 1970).
H. HARPER and P. W. McMILLAN, Phys. Chem. Glasses 13 (1972) 97.
E. E. OSBORN and A. MUAN, “Phase Diagrams for Ceramists” (American Ceramic Society, 1964) p. 210.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
SUZUKI, S., TANAKA, M. & KANEKO, T. Glass-ceramic from sewage sludge ash. Journal of Materials Science 32, 1775–1779 (1997). https://doi.org/10.1023/A:1018584202392
Issue Date:
DOI: https://doi.org/10.1023/A:1018584202392