Abstract
The objective of this paper is to study the fixture planning of modular fixtures for cutting by means of a computer-aided fixture system (CAFS). The fixture planning presented here integrates the database of modular fixtures, neural networks, the heuristic algorithm of fixture position and the use of Advanced Modelling Extension Release 2.1 (AME) of AutoCAD R12 as the 3D graphic interface. The function suitable for the AME environment was also controlled to obtain detailed data of the geometry and topology of the workpiece to develop the fixture planning for modular fixtures. First of all, the concept of group technology (GT) was used to establish the coding database of the modular fixture element for use in the system. This paper presents fixture planning which combines the pattern recognition capability of the neural networks and the concept of GT to group the workpieces with different patterns but identical fixture modes into the same group. After network training, the fixture mode of the workpiece to be clamped can be inferred, and the selection of the fixture elements can be completed.
Similar content being viewed by others
References
Arai, E. and Iwata, K. (1993) CAD system with product assembly/disassembly planning function. Robotics and Computer-Integrated Manufacturing, 10(1/2), 41–48.
Bartholomew, O.N., Alladin, S. and Lyu, P. (1989) A framework for a rule-base expert fixturing system for face milling planer surfaces on a CAD system using flexible fixtures. Journal of Manufacturing Systems, 7(3), 193–207.
Boerma, T. R. and Kals H. J. J. (1988) FIXES, a system for automatic selection of set-ups and design of fixtures. Annals of CIRP, 37(1), 440–446.
Gandhi, M. V. and Thompson, B. S. (1986) Automated design of modular fixtures for flexible manufacturing systems. Journal of Manufacturing Systems, 5(4), 243–252.
Halder (1985) Halder Modular Jig and Fixture System 70, Erwin Halder KG, West Germany.
Huang, S.-H. and Trappey, A. J. C. (1992) The integration of modular fixture database, fixturing knowledge base and 3-D fixture planning interface. Computers and Industrial Engineering, 23(1–4), 381–384.
Lim, B. S., Imao, T., Yoshida, H., Goto, K., Koh, S. L., Lim, D., Chin, L. and Gan, S. C. (1992) Integrated modular fixture design, pricing and inventory control expert system. International Journal of Production Research, 30(9) 2019–2044.
Lippmann, R. P. (1987) An introduction to computing with neural nets. IEEE ASSP Magazine, 4–22.
Parker, D. B. (1985) Learning logic. Technical Report TR-47, Center for Computational Research in Economics and Management Science, MIT, Cambridge, MA.
Rober, H. N. (1987) Kolmogorov's mapping neural network existence theorem, in IEEE International Conference on Neural Networks 87, Vol. 3, pp. 11–14.
Rober, H. N. (1989) Theory of the backpropagation neural network, in IJCNN-89, Vol. 1, pp. 593–605.
Rumelhart, D. E. and McClelland, J. L. (1989) Parallel Distributed Processing, Vol. 1, MIT Press, Cambridge MA.
Shin Yih, L. (1987) Application of modular fixture. Mechanical Industry, 10, 116–120.
Shirinzadeh, B. (1993) Issues in the design of the reconfigurable fixture modules for robotic assembly. Journal of Manufacturing Systems, 12(1), 1–14.
Werbos, P. (1974) Beyond regression: new tools for prediction and analysis in the behavioral science, PhD Thesis, Harvard University, Cambridge, MA.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
LIN , ZC., HUANG , JC. The application of neural networks in fixture planning by pattern classification. Journal of Intelligent Manufacturing 8, 307–322 (1997). https://doi.org/10.1023/A:1018541812444
Issue Date:
DOI: https://doi.org/10.1023/A:1018541812444