Abstract
In a 2-l stirred tank reactor (STR), maximum production rate ofitaconic acid was 0.48g/l.h , for an agitation rate of 400 rpm andan aeration rate of 0.5 vvm. In an air-lift reactor (ALR) themaximum production rate was 0.64 g/l.h at an O supply rate of0.41 l O /l. min. Power input per unit volume which gave themaximum production rates for STR and ALR were 1180 and 542 W/m 3,respectively. If O -enriched air was used in place of air for ALR,the corre-sponding power input per unit volume was decreased to 34W/m 3 . ALR requires less power input per unit volume in comparisonwith that of STR whether therefore air or O -enriched air is used.ALR would be a suitable bioreactor for a large production of itaconicacid.
Similar content being viewed by others
References
Faust, U and Sukatch, DA (1977). J Ferment Bioeng 55: 609–614.
Friedkin, M (1945). Ind Eng Chem 17: 607–638.
Fukuda, H, Shiotani, T, Okada, W and Morioka, H (1978). J Ferment Technol 56: 619–625.
Matsushima, H, Maeda, K, Fukatsu, H, Kasahara, K and Mase, Y (1972). J Ferment Technol 50: 100–104.
Okabe, M, Ohta, N and Park, Y (1993). J Ferment Bioeng 76: 117–120.
Park, Y, Ohta, N and Okabe, M (1993). Biotechnol Lett 15: 583–586.
Yahiro, K, Takahama, T, Park, Y and Okabe, M (1995). J Ferment Technol 79: 506–508.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yahiro, K., Takahama, T., Jai, Sr. et al. Comparison of air-lift and stirred tank reactors for itaconic acid production by Aspergillus terreus. Biotechnology Letters 19, 619–621 (1997). https://doi.org/10.1023/A:1018374428391
Issue Date:
DOI: https://doi.org/10.1023/A:1018374428391