Abstract
Joints obtained by soldering, adhesion, autohesion and fastening and involving metals, polymer-matrix composites and concrete, as studied by electrical resistance measurement, are reviewed. The measurement was conducted during bonding, debonding, fastening and/or unfastening, and involved either measuring the contact resistance of the joint interface or measuring the apparent volume resistance of a member of the joint.
Similar content being viewed by others
REFERENCES
J. Seyyedi and S. Jawaid, Soldering & Surface Mount Tech. 4 (1990) 44.
X. Luo and D. D. L. Chung, J. Mater. Sci. 34 (1999) 273.
S. K. Kang, R. Rai and S. Purushothaman, in Proceedings of the 46th Electronics Components Conference, IEEE (1996) p. 565.
M. A. Gaynes, R. H. Lewis, R. F. Saraf and J. M. Roldan, IEEE Transactions on Components Packaging and Manufacturing Technology, Part B - Advanced Packaging 18(2) (1995) 299.
J. C. Jagt, P. J. M. Beris and G. F. C. M. Lijten, ibid. Part B - Advanced Packaging 18(2) (1995) 292.
M. A. Gaynes and R. H. Lewis, in the Proceedings of the 7th International SAMPE Electronics Conference (Critical Materials and Processes in a Changing World), edited by B. Rasmussen, R. Wegman, A. Hirtand R. Rossi (1994) p. 69.
Z. Mei and D. D. L. Chung, Cem Concr Res 30 (2000) 799.
H. A. Toutanji, Composite Structures 44(2) (1999) 155.
H. A. Toutanji and T. El-Korchi, J. Composites for Construction 3(1) (1999) 38.
Y. Lee and S. Matsui, Tech. Reports Osaka University 48(2319–2337) (1998) 247.
E. K. Lau, A. S. Mosallam and P. R. Chakrabarti, Int. SAMPE Tech. Conf. SAMPE, Covina, CA (1998) Vol. 30, p. 293.
A. Liman and P. Hamelin, in Proceedings of the International Conference of Computer Methods in Composite Materials, CADCOMP 1998 (Computational Mechanics Publ., Ashurst, England) p. 569.
P. Balaguru and S. Kurtz, in the Proceedings of the International Seminar on Repair and Rehabilitation of Reinforced Concrete Structures: The State of the Art 1998, ASCE, Reston, VA, p. 155.
A. Nanni and W. Gold, in the Proceedings of the International Seminar on Repair and Rehabilitation of Reinforced Concrete Structures: The State of the Art 1998, ASCE, Reston, VA, p. 144.
H. A. Toutanji and T. El-Korchi, in the Proceedings of the International Seminar on Repair and Rehabilitation of Reinforced Concrete Structures: The State of the Art 1998, ASCE, Reston, VA, p. 134.
Z. Geng, M. J. Chajes, T. Chou and D. Y. Pan, Composites Sci. Tech. 58(8) (1998) 1297.
I. Gergely, C. P. Pantelides, R. J. Nuismer and L. D. Reaveley, J. Composites for Construction 2(4) (1998) 165.
H. N. Garden and L. C. Hollaway, Composites, Part B 29(4) (1998) 411.
K. Kikukawa, K. Mutoh, H. Ohya, Y. Ohyama, H. Tanaka and K. Watanabe, Composite Interfaces 5(5) (1998) 469.
M. Xie and V. M. Karbhari, J. Composite Mater. 32(21) (1998) 1894.
V. M. Karbhari, M. Engineer and D. A. Eckel II, J. Mater. Sci. 32(1) (1997) 147.
D. P. Henkel and J. D. Wood, NDT & e International 24(5) (1991) 259.
A. K. Pandey and M. Diswas, Journal of Sound & Vibration 169(1) (1994) 3.
H.-Y. Wu, S. Lee and J.-Y. Wang, J. Mater. Proc. Tech. 75(1–3) (1998) 173.
S. Church, J. Day and B. Wild, Materials World 4(7) (1996) 385.
S. P. Godfrey, P. L. Threadgill and M. Strangewood, in Materials Research Society Symp. Proc Materials Research Society, Pittsburgh, PA, USA, 1995, Vol. 364, No. 2, p. 793.
H. R. Hwang and R. Y. Lee, J. Mater. Sci. 31(9) (1996) 2429.
Z. C. Wang, N. Ridley, G. W. Lorimer, K. Knauss and G. A. D. Briggs, ibid. 31(19) (1996) 5199.
M. F. Vallat, M. Stachnik and J. Schultz, J. Adhesion 58(3/4) (1996) 183.
R. Pitchumani, S. Ranganathan, R. C. Don, J. W. Gillespie, Jr and M. A. Lamontia, Int. J. Heat Mass Transfer 39(9) (1996) 1883.
A. C. Loos and M. Li, J. Thermoplastic Composite Materials 7(4) (1994) 280.
E. J. Jun, T. W. Kim and W. I. Lee, High Temperatures- High Pressures 22(6) (1990) 655.
J. Jou, C. Liu, J. Liu and J. King, J. Appl. Polymer Sci. 47(7) (1993) 1219.
R. S. Raghava and R. W. Smith, J. Polymer Sci. Part B - Polymer Physics 27(12) (1989) 2525.
A. G. Mikos, Polymer 30(1) (1989) 84.
G. R. Hamed, Rubber Chem. Tech. 61(3) (1988) 548.
J. C. Howes and A. C. Loos, in the Proceedings of the American Society of Composites, 2nd Technical Conference (Technomic Publ. Co,. Lancaster, PA, 1987) p. 110.
G. R. Hamed and C.-H. Shieh, J. Polymer Sci. Polymer Physics Ed. 21(8) (1983) 1415.
L. Bothe and G. Rehage, Rubber Chem. Tech. 55(5) (1982) 1308.
G. R. Hamed, ibid. 54(3) (1981) 576.
C. K. Rhee and J. C. Andries, ibid. 54(1) (1981) 101.
P. G. Degennes, J. Chem. Phys. 55(2) (1971) 572.
Y. H. Kim and R. P. Wool, Macromolecules 16(7) (1983) 1115
R. P. Wool, Rubber Chem. Tech. 57(2) (1984) 307.
Z. Mei and D. D. L. Chung, Int. J. Adh. Adh. 20 (2000) 273.
S. Dixon, C. Edwards and S. B. Palmer, Ultrasonics 32 (1994) 425.
V. K. Winston, Int. SAMPE Symp. Exhib. (Proc.) 43 (1998) 1428.
Z. Mei and D. D. L. Chung, Int. J. Adh. Adh. 20 (2000) 173.
Idem., ibid. 20 (2000) 135.
M. Diamond, Sheet Metal Industries 66(11) (1989) 587.
X. Luo and D. D. L. Chung, J. Mater. Eng. Perf. 9 (2000) 95.
J. Zhang, J. Chen, Y. Qiao and C. Cao, Trans. Inst. Metal Finishing 77(3) (1999) 106.
A. A. Ono, T. Shinohara and S. Tsujikawa, Zairyo to Kankyo/Corrosion Eng. 48(3) (1999) 169.
T. Shibata, O. Yamazaki and S. Fujimoto, ibid. 48(3) (1999) 155.
V. Vignal, J. M. Olive and D. Desjardins, Corrosion Sci. 41(5) (1999) 869.
M. F. Lopez, A. Gutierrez, C. L. Torres and J. M. Bastidas, J. Mater. Res. 14(3) (1999) 763.
S. V. Phadnis, M. K. Totlani and D. Bhattacharya, Trans. Inst. Metal Finishing 76(6) (1998) 235.
N. E. Hakiki, M. Dacurhabelo, A. M. P. Simoes and M. G. S. Ferreira, J. Electrochem. Soc. 145(11) (1998) 3821.
M. Lakatos-Varsanyi, F. Falkenberg and I. Olefjord, Electrochimica Acta 43(1/2) (1998) 187.
J. M. Bastidas, M. F. Lopez, A. Gutierrez and C. L. Torres, Corrosion Sci. 40(2/3) (1998) 431.
R. A. Guidotti and G. C. Nelson, in Mater. Res. Soc. Symp. Proc., MRS,. Warrendale, PA (1998) Vol. 496, p. 469.
A. Hannani and F. Kermiche, Trans. Inst. Metal Finishing 76(3) (1998) 114.
S. Fujimoto, T. Yamada and T. Shibata, J. Electrochem. Soc. 145(5) (1998) L79.
A. Atrens, B. Baroux and M. Mantel, ibid. 144(11) (1997) 3697.
G. Chen and C. R. Clayton, ibid. 144(9) (1997) 3140.
F. Mansfeld, C. B. Breslin, A. Pardo and F. J. Perez, Surf Coatings Tech. 90(3) (1997) 224.
M. Drogowska, H. Menard, A. Lasia and L. Brossard, J. Appl. Electrochem. 26(11) (1996) 1169.
T. J. Mckrell and J. M. Galligan, Mater. Res. Soc. Symp. Proc., MRS. Warrendale, PA (1996) Vol. 404, p. 199.
X. Luo and D. D. L. Chung, Adv. Eng. Mater. 3(1–2) (2001) 62.
Idem., Polymer Eng. Sci. 40 (2000) 1505.
X. Wang and D. D. L. Chung, Polymer Composites 18(6) (1997) 692.
X. Luo and D. D. L. Chung, Cem. Concr. Res. 30(2) (2000) 323.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chung, D.D.L. Review Joints obtained by soldering, adhesion, autohesion and fastening, studied by electrical resistance measurement. Journal of Materials Science 36, 2591–2596 (2001). https://doi.org/10.1023/A:1017998922281
Issue Date:
DOI: https://doi.org/10.1023/A:1017998922281