Abstract
An inert simulant for one type of explosive formulation was subjected to low rate compressional punch deformation to determine the presence of potential strain initiation mechanisms. The presence of certain types of strain initiation mechanisms may lead to unintentional ignition in some explosive formulations. Laser induced fluorescence speckle photography was used to determine the magnitude and direction of the developing strain field during testing. Post-test SEM analyses was used to determine damage mechanisms occurring within the material. The magnitude and direction of the plastic flow lines show that a dead zone forms in the strain field immediately under the punch in agreement with Prandtl's slip-line solution of the punch problem. However, material flow patterns diverge from Prandtl's solution for other regions. Large shear strains also occur in the specimen, leading to the formation of slip bands in the hard phase constituent.
Similar content being viewed by others
References
C. Loupais and A. Fanget, in Proceedings of the Ninth International Detonation Symposium, 1989, p. 1047.
S. Y. Ho, in Proceedings of the Ninth International Detonation Symposium, 1989, p. 1052.
K. G. Hoge, Appl. Polymer Symp. 5 (1967) 19.
M. T. Shaw, J. R. Price and M. L. Matuzak, J. Rheology 23 (1979) 3.
L. Prandtl, Nachr. Ges. Wiss. Gottingen (1920) 74.
R. Hill, “The Mathematical Theory of Plasticity” (Oxford University Press, London, 1950).
L. M. Kachanov, “Foundations of the Theory of Plasticity” (North-Holland Publishing, Amsterdam, 1971) p. 217.
W. Prager, “Theory of Perfectly Plastic Solids” (Dover Publications, New York, 1951) p. 169.
R. T. Shield, Quart. Appl. Math. 11 (1953) 61.
A. J. M. Spencer, J. Mech. Phys. Solids 12 (1964) 337.
T. M. Tan, S. Li and P. C. Chou, “Finite Elements Analysis and Design 6” (Elsevier, 1989) p. 173.
J. M. Hill, J. Mech. Appl. Math 49 (1996) 81.
W. J. Sylwestrowics, J. Mech. Phys. Solids 1 (1953) 258.
H. T. Goldrein, J. M. Huntley, S. J. P. Palmer, M. B. Whitworth and J. E. Field, in Proceedings of the Tenth International Detonation Symposium, 1993, p. 525.
B. W. Asay, G. W. Laabs, B. F. Henson and D. J. Funk, J. of Appl. Phys. 82 (1997) 1093.
M. SjÖdahl, J. Appl. Optics 33 (1994).
D. J. Funk, G. W. Laabs, P. D. Peterson and B. W. Asay, “Shock Compression of Condensed Matter1995” (Woodbury, New York, 1996) p. 145.
J. M. Huntley and J. E. Field, in Proceedings of the 2nd International Conference on Photomechanics and Speckle Metrology, 1991.
P. D. Peterson, D. J. Idar and J. S. Gardner, Microscopy and Microanalysis 3 (1997) 1249.
J. J. Mason, A. Rosakis and G. Ravichandran, “Full Field Measurement of the Dynamic Deformation Field Around a Growing Adiabatic Shear Band at the Tip of a Dynamically Loaded Crack or Notch,” J. Mech. Phys. Solids 42(11) (1994) 1679.
M. Zhou, R. J. Clifton and A. Needleman, “Tungsten and Tungsten Alloys-1992” (Metal Powder Industries Federation, Princeton, New Jersey, 1992).
M. Zhou, A. J. Rosakis and G. Ravichandran, “Dynamically Propagating Shear Bands in Impact loaded Prenotched Plates,” J. Mech. Phys. Solids (1996) 1007.
B. W. Asay, G.W. Laabs, P. D. Peterson and D. J. Funk, “Shock Compression of Condensed Matter1995” (Woodbury, New York, 1996) p. 925.
V. Krishna Mohan, V. C. Jyothi Bhasu and J. E. Field, in Proceedings of the Ninth International Detonation Symposium (1989) p. 1276.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Peterson, P.D., Mortensen, K.S., Idar, D.J. et al. Strain field formation in plastic bonded explosives under compressional punch loading. Journal of Materials Science 36, 1395–1400 (2001). https://doi.org/10.1023/A:1017572024183
Issue Date:
DOI: https://doi.org/10.1023/A:1017572024183