Abstract
Microstructure studies of laser-clad Fe-Al bronze on an Al-Si alloy were carried out by OM(optical microscope), SEM(scanning electron microscope), TEM(transmission electron microscope) and XRD(X ray diffraction) analyses. The cross-section of the laser-cladding was divided into clad region and transitional region. The clad region composes a matrix with a twin structure of needle-like and feathery appearance and a second phase of Cu9Al4. The transitional region consists of two layers. The layer close to the clad region shows polygonal crystalline while the layer close to the substrate region displays a needle-like structure. XRD analyses show that the main phases in the polygonal crystalline layer and the needle-like structure layer are Cu3Al + Cu9Al4 and CuAl2 + α-Al, respectively. Finally, the formation mechanism of two regions was analysed.
Similar content being viewed by others
References
Y. Liu, J. Mazumder and K. Shibata, Metall. Mater. Trans. B 25B (1994) 749.
L. Poire and E. Blank, Journal de Physique IV 4 (1994) C4.
K. Tanaka, T. Saito, Y. Shimura, K. Mori, M. Kawasaki, M. Koyama and H. Murase, J. Japan Inst. Metals 57(10) (1993) 1114.
Y. Liu, J. Koch and J. Mazumder, Metall. Mater. Trans. B 25B (1994) 425.
M. Kawasaki, K. Takase, S. Kato, M. Nakagawa, K. Mori, M. Nemoto, S. Takagi and H. Sugimoto, in Proc. Conf. “International Congress & Exposition,” Detroit, Michigan, February 1992, SAE Technical Paper Series 920571.
A. H. Wang, C. S. Xie, W. Huang and C. Y. Xu, Rare Metal Materials and Engineering 26(6) (1997) 41.
P. Brezina, International Metals Reviews 27(2) (1982) 77.
C. W. Draper, J. Mater. Sci. 16 (1981) 17774.
A. H. Wang, C. S. Xie and J. H. Nie, Materials Science & Technology 15(8) (1999) 957.
B. P. Babob, “Welding of Aluminium and Its Alloys with Other Metals” (Yuhang Press, Beijing, 1990) p. 20.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wang, A.H., Xie, C.S. Microstructural study of laser-clad Fe-Al bronze on Al-Si alloy. Journal of Materials Science 36, 1975–1979 (2001). https://doi.org/10.1023/A:1017514428148
Issue Date:
DOI: https://doi.org/10.1023/A:1017514428148