Abstract
The paper describes effects of quenching and tempering processes on the magnetic properties, electric resistivity, and hardness of steels with the chromium content higher than 10%. These parameters have been measured as functions of the heating temperature for quenching and tempering of high-chromium steels with different carbon contents.
Similar content being viewed by others
REFERENCES
Bida, G.V, Nichipuruk, A.P., and Tsar'kova, T.P., Magnetic Properties of Steels after Quenching and Tempering. I. General. Carbon Steels, Defektoskopiya, this issue, pp. 79-99.
Bida, G.V, Nichipuruk, A.P., and Tsar'kova, T.P., Magnetic Properties of Steels after Quenching and Tempering. II. Low-Doped Steels, Defektoskopiya, this issue, pp. 100-115.
Gulyaev, A.P. Metallovedenie (Metal Science), Moscow: Metallurgiya, 1978.
Gol'dshtein, M.I., Grachev, S.V., and Veksler, Yu.G., Spetsial'nye stali (Special Steels), Moscow: Metallurgiya, 1985.
Rakhshtadt, A.G., Pruzhinnye stali i splavy (Spring Steels and Alloys), Moscow: Metallurgiya, 1982.
Bida, G.V., Tsar'kova, T.P., Kostin, V.N., and Sazhina, E.Yu., Utilization of Relaxation Magnetic Parameters in Nondestructive Testing of Quenched and Tempered Steels, Defektoskopiya, 1991, no. 12, pp. 39-44.
Bida, G.V., Sazhina, E.Yu., and Tsar'kova, T.P., Magnetic Parameters Associated with Reversible Magnetization Processes in the Model of Bent Domain Wall, Fiz. Met. Metalloved., 1992, no. 1, pp. 31-35.
Spektor, A.G., Razmernaya stabil'nost' podshipnikovoi stali (Dimensional Stability of Ball-Bearing Steel),Moscow: VNIIPP, 1969.
Novikov, I.I., Teoriya termicheskoi obrabotki metallov (Theory of Thermal Processing of Metals), Moscow: Metallurgiya, 1974.
Mikheev, M.N., Bida, G.V., Tsar'kova, T.P., and Kostin, V.N., Investigation of Cyclic Magnetization Regimes for Testing Quenched and Tempered Components on the Base of Residual Magnetic Induction, Defektoskopiya, 1982, no. 8, pp. 69-79.
Gorkunov, E.S., Gavrilova, L.D., and Nichipuruk, A.P., Magnetic and Electromagnetic Techniques for Testing Quality of Quenching and Tempering, and Evaluating Residual Austenite in Products from the 95Kh18 Steel, Defektoskopiya, 1995, no. 12, pp. 28-38.
Bida, G.V. and Nichipuruk, A.P., Measurements of Coercive Force in Nondestructive Testing, Defektoskopiya, 2000, no. 10, pp. 3-28.
Bida, G.V. and Kamardin, V.M., Utilization of Magnetic Parameters Associated with Reversible Magnetization Processes in Nondestructive Evaluation of Viscous Parameters of Rolled Metal, Defektoskopiya, 1990, no. 11, pp. 50-56.
Bida, G.V. and Kamardin, V.M., Nondestructive Evaluation of Viscous Parameters of Rolled Metal, Defektoskopiya, 1991, no. 7, pp. 10-21.
Bida, G.V., Tartachnaya, M.V., and Pochuev, N.D., Feasibility of Sorting Out Pipes from High-Strength and Grey Pig Iron, Tekhnicheskaya Diagnostika i Nerazrushayushchii Kontrol', 1992, no. 2, pp. 34-41.
Bida, G.V., Kamardin, V.M., and Tartachnaya, M.V., Feasibility of Nondestructive Evaluation of Mechanical Properties of Thermally Processed Rails, Tekhnicheskaya Diagnostika i Nerazrushayushchii Kontrol', 1993, no. 4, pp. 42-48.
Bida, G.V., Sazhina, E.Yu., Pochuev, N.D., Tsar'kova, T.P., and Nesterova, O.V., Feasibility of Nondestructive Testing of Tubes for Oil Pipelines, Defektoskopiya, 1995, no. 2, pp. 82-88.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bida, G.V., Nichipuruk, A.P. & Tsar'kova, T.P. Magnetic Properties of Steels after Quenching and Tempering. III. High-Chromium Steels.. Russian Journal of Nondestructive Testing 37, 116–127 (2001). https://doi.org/10.1023/A:1016771822625
Issue Date:
DOI: https://doi.org/10.1023/A:1016771822625