Abstract
An approach is proposed to solve a stress–strain problem for anisotropic rigidly fixed plates on an elastic foundation. The problem is solved by the method of successive approximations. At each approximation, the deflection is represented as polynomials whose coefficients are determined from a system of linear algebraic equations. Study is made of the influence of the reinforcement angle and the modulus of subgrade reaction on the deflections and the bending moments in an orthotropic plate.
Similar content being viewed by others
REFERENCES
S. A. Ambartsumyan, The Theory of Anisotropic Shells [in Russian], Nauka, Moscow (1961).
E. K. Ashkenazi and É. V. Ganov, Anisotropy of Structural Materials [in Russian], Mashinostroenie, Leningrad (1980).
A. T. Vasilenko, “Solving a problem on the stress–strain state of layered elliptic anisotropic plates,” Dop. NAN Ukrainy, No. 4, 45–49 (1993).
A. T. Vasilenko and G. P. Urusova, “Solving a bending problem for a simply supported anisotropic elliptic plate,” Prikl.Mekh., 34, No. 5, 98–103 (1998).
A. T. Vasilenko and G. P. Urusova, “The stress state of simply supported laminated elliptic plates made of anisotropic materials,” Mekh. Komp. Mater., No. 4, 496–504 (1997).
V. Z. Vlasov and N. N. Leont'ev, Beams, Plates, and Shells on an Elastic Foundation [in Russian], Fizmatgiz, Moscow (1960).
S. G. Lekhnitskii, Anisotropic Plates [in Russian], Gostekhizdat, Moscow–Leningrad (1947).
S. P. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells, McGraw-Hill, New York (1959).
V. Levinson and S. Bharatha, “Elastic foundation models--a new approach,” in: Proc. 4th Symp. on Engineering Applications of Solid Mechanics, Canadian Society of Mechanical Engineering, Sheridan Park Research Community, Canada (1978), pp. 177–189.
E. H. Mansfield, “Analysis of unbalanced multilayered elliptical plates under linearly varying pressure,” Int. J. Mech.Sci., 32, No. 5, 417–422 (1990).
Y. Ohasi, “Bending of thin elliptic plate of orthotropic material under uniform lateral loading,” ZAMP, 3, No. 3, 212–224 (1952).
Ya. M. Grigorenko and L. I. Zakhariichenko, “Analysis of the stress–strain state of noncircular cylindrical shells subject to thickness variation and weight retention,” Int. Appl. Mech., 35, No. 6, 567–576 (1999).
A. T. Vasilenko and G. P. Urusova, “The stress state of anisotropic conic shells with a thickness varying in two directions,” Int. Appl. Mech., 36, No. 5, 631–638 (2000).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vasilenko, A.T. Bending of an Anisotropic Elliptic Plate on an Elastic Foundation. International Applied Mechanics 38, 351–355 (2002). https://doi.org/10.1023/A:1016042530247
Issue Date:
DOI: https://doi.org/10.1023/A:1016042530247