Abstract
Direct and inverse problems of forming of long‐length profiles with double curvature and a given angle of twisting under conditions of creep are considered. A finite‐difference scheme for the numerical solution is proposed. Examples of solving problems with different types of external actions for a profile with a rectangular cross section are given. Experimental and numerical data are compared for twisting of beams with square and circular cross sections in the regime of creep at temperatures of 725 and 740° C for St. 45 steel.
Similar content being viewed by others
REFERENCES
I. V. Sukhorukov, B. V. Gorev, I. D. Klopotov, and S. N. Verichev, “Forming of reinforced panels of double curvature under conditions of creep,” in: Proc. XXVI Int. Conf. on Theory of Plates and Shells (Nizhnii Novgorod, Sept. 1993), Vol. 3, B. i., N. Novgorod (1994), pp. 199-207.
I. Yu. Tsvelodub, “Inverse problems of forming of inelastic plates under creep,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 1, 96-106 (1996).
I. Yu. Tsvelodub, “Some inverse problems of bending of plates under creep,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 5, 126-134 (1985).
I. A. Banshchikova, “Inverse problem for a viscoelastic plate,” in: Dynamics of Continuous Media (collected scientific papers) [in Russian], No. 113, Novosibirsk (1998), pp. 13-18.
I. V. Sukhorukov, “One-dimensional problems of forming,” ibid., pp. 150-155.
I. V. Sukhorukov and I. Yu. Tsvelodub, “Iterative method for solving inverse relaxation problems,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 3, 93-101 (1991).
I. A. Birger, Rods, Plates, and Shells [in Russian], Nauka, Moscow (1992).
Yu. N. Rabotnov, Mechanics of a Deformable Solid [in Russian], Nauka, Moscow (1988).
Yu. N. Rabotnov, Creep Problems in Structural Members, North-Holland, Amsterdam (1969).
N. S. Bakhvalov and N. P. Zhidkov, Numerical Methods [in Russian], Nauka, Moscow (1987).
A. E. Mudrov, Numerical Methods for PC on the BASIC, FORTRAN, and PASCAL Languages [in Russian], RASKO, Tomsk (1992).
A. N. Konovalov, Introduction into Numerical Methods of Linear Algebra [in Russian], Nauka, Novosibirsk (1993).
A. F. Nikitenko and I. V. Sukhorukov, “Approximate method for solving relaxation problems in terms of material's damagability under creep,” J. Appl. Mech. Tech. Phys., 35, No. 5, 770-775 (1994).
I. V. Lyubashevskaya and O. V. Sosnin, “Approximate estimates of external loads under steady creep in construction elements,” in: Dynamics of Continuous Media (collected scientific papers) [in Russian], No. 114, Novosibirsk (1999), pp. 183-185.
L. M. Kachanov, Theory of Creep [in Russian], Fizmatgiz, Moscow (1960).
B. V. Gorev, “Estimate of creep and long-time strength of construction elements by the method of characteristic parameters. 1,” Probl. Prochn., No. 4, 30-36 (1979).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Banshchikova, I.A., Gorev, B.V. & Sukhorukov, I.V. Two‐dimensional problems of beam forming under conditions of creep. Journal of Applied Mechanics and Technical Physics 43, 448–456 (2002). https://doi.org/10.1023/A:1015382723827
Issue Date:
DOI: https://doi.org/10.1023/A:1015382723827