Abstract
Catalytic activity tests were carried out on Cu-ZSM-5 and Fe-ZSM-5 catalysts for the reduction of NOx with i-C4H10. Formation of CO was the major drawback of Fe-ZSM-5 catalyst, which was attributed to the presence of iron oxide particles. Increasing the Si/Al ratio appeared to slightly strengthen Cu-ZSM-5 catalyst in the presence of water vapor.
Similar content being viewed by others
REFERENCES
M. Shelef: Chemical Review, 95, 209 (1995).
A. Fritz, V. Pitchon: Appl. Catal. B, 13, 1 (1997).
M. Iwamoto, H. Hamada: Catal. Today, 10, 57 (1991).
W. Grünert, N.W. Hayes, R.W. Joyner, E.S. Shpiro, M.R.H. Siddiqui, G.N. Baeva: J. Phys. Chem., 98, 10832 (1994).
H.Y. Chen, W.M.H. Sachtler: Catal. Today, 42, 73 (1998).
H.T. Lee, H.K. Rhee: Catal. Lett., 61, 71 (1999).
A.A. Battiston, J.H. Bitter, D.C. Koningsberger: Catal. Lett., 66, 75 (2000).
H.Y. Chen, T. Voskoboinikov, W.M.H. Sachtler: J. Catal., 186, 91 (1999).
S. Bhatia: Zeolite Catalysis: Principles and Applications, p. 7. CRC Press, Boca Raton, 1990.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Saaid, I.M., Mohamed, A.R. & Bhatia, S. Comparative study of Cu-ZSM-5 and Fe-ZSM-5 in the SCR of NOx with i-C4H10 . Reaction Kinetics and Catalysis Letters 75, 359–365 (2002). https://doi.org/10.1023/A:1015267400608
Issue Date:
DOI: https://doi.org/10.1023/A:1015267400608