Abstract
In order to reveal the optimum Co loading, the selective catalytic reduction of NO with C3H6 over Co/Al2O3 catalyst was studied in a systematic fashion by varying the amount of cobalt oxide. It was found that upon loading a small amount of cobalt oxide (namely 0.5 wt% on a Co metal basis), the combination between Co(II) acetate salt and a high-purity alumina provided an active catalyst in the presence of excess oxygen and water. TPR measurement showed the presence of Co species other than CoAl2O4 spinel in the most excellent performance catalyst, from which the active sites should be produced.
Similar content being viewed by others
References
M. Iwamoto, Proc. of Meeting of Catalytic Technology for Removal of Nitrogen Monoxide, Tokyo, Jan. 1990, pp. 17–22; M. Iwamoto, H. Yahiro, S. Shundo, Y. Yu-u and N. Mizuno, Appl. Catal. 69 (1991) L15.
W. Held, A. Konig, T. Richter and L. Peppu, SAE Paper 900496 (1990).
Y. Traa, B. Burger and J. Weitkamp, Micropor. Mesopor. Mater. 30 (1999) 3 and references therein.
Y. Kintaichi, H. Hamada, M. Tabata, M. Sasaki and T. Ito, Catal. Lett. 6 (1990) 239.
H. Hamada, Y. Kintaichi, M. Sasaki, I. Ito and M. Tabata, Appl. Catal. 75 (1991) L1.
J.-Y. Yan, M.C. Kung, W.M.H. Sachtler and H.H. Kung, J. Catal. 172 (1997) 178.
H. Hamada, Y. Kintaichi, M. Inaba, M. Tabata, T. Yoshinari and H. Tsuchisa, Catal. Today 29 (1996) 53.
T. Maunula, J. Ahola and H. Hamada, Appl. Catal. B: Environmental 26 (2000) 173.
L. Chen, T. Horiuchi and T. Mori, Catal. Lett. 72 (2001) 71.
A.J. March, J.I. Di Cosimo and C.R. Apesteguia, Catal. Today 15 (1992) 383.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Horiuchi, T., Fujiwara, T., Chen, L. et al. Selective Catalytic Reduction of NO by C3H6 over Co/Al2O3 Catalyst with Extremely Low Cobalt Loading. Catalysis Letters 78, 319–323 (2002). https://doi.org/10.1023/A:1014952400564
Issue Date:
DOI: https://doi.org/10.1023/A:1014952400564