Skip to main content
Log in

The Diffraction of Elastic Waves on the Tip of Slots

  • Published:
Journal of Nondestructive Evaluation Aims and scope Submit manuscript

Abstract

The diffraction of elastic waves on the tip of cracks has been widely used in detecting defects. It is always difficult to fabricate a real crack in the laboratory. In this investigation, a slot of width 0.3 mm is used as an alternative to simulate the fatigue crack. The slot of 0.3 mm width is embedded in a cylindrical block. The diffractions of elastic waves on the tip of the artificial slot are measured for three test blocks made of steel, aluminum, and brass, respectively. In the experiment, the amplitudes of diffracted waves at various receiving angles are recorded and compared with the theoretical predictions of diffraction on a fatigue crack tip. The influences of incident angle and frequency and material of the test block are presented. By examining the discrepancies of diffractions on the slots and cracks, one is able to evaluate the feasibility of replacing a real crack by an artificial slot, once the real crack is not available.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

REFERENCES

  1. K. G. Hall, Visualization techniques for the study of ultrasonic wave propagation in the railway industry, Materials Evaluation, 42(7):922-933 (June 1984).

    Google Scholar 

  2. M. G. Silk, Sizing crack-like defects by ultrasonic means, in R. S. Sharpe, ed., Research Techniques in Nondestructive Testing, (London, Academic, 1977), Vol. III Chap. 2.

    Google Scholar 

  3. D. G. Cosgrove, Check-out of the Detla technique, Report DP70-001 (General Dynamics, Convair Aerospace Division, October 1970).

  4. M. G. Silk, and B. H. Lidington, The potential of diffracted ultrasound in the determination of crack depth, Nondestructive Testing, 8:146-151 (June 1975).

    Google Scholar 

  5. R. B. Thompson, Application of elastic wave scattering theory to the detection and characterization of flaws in structural materials, Wave Propagation in Inhomogeneous Media and Ultrasonic Nondestructive Evaluation, Applied Mechanics Division (AMD) (New York, American Society of Mechanics Engineers, 1984) Vol. 62, pp. 61-73.

    Google Scholar 

  6. G. J. Gruber, G. J. Hendrix, and W. R. Schick, Characterization of flaws in piping systems using satellite pulses, Materials Evaluation, 42(4):462-432 (April 1984).

    Google Scholar 

  7. G. J. Gruber, and J. L. Jackson, Ultrasonic evaluation of structural integrity using satellite pulses, Proceedings of the Fifteenth Symposium on Nondestructive Evaluation, San Antonio, TX, April 23–25, 1985, pp. 97-101.

  8. R. K. Chapman, Ultrasonic reflection from smooth flat cracks: Exact solution for the semi-infinite crack, CEGB Report (1981) NW/SSD/RR/14/81.

  9. J. A. Ogilvy, and J. A. G. Temple, Diffraction of elastic wave by cracks: Application to time-of-flight inspection. Ultrasonics, 21:259-269 (1983).

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Her, SC., Lu, SZ. The Diffraction of Elastic Waves on the Tip of Slots. Journal of Nondestructive Evaluation 20, 133–143 (2001). https://doi.org/10.1023/A:1014701424653

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1014701424653

Navigation