Abstract
Supercritical extraction using carbon dioxide was examined for the removal of binder from multilayer ceramic capacitors. The binder contained poly(vinyl butyral) (PVB) and dioctyl phthalate (DOP), and the dielectric and metal electrode materials were barium titanate and platinum, respectively. At 40 MPa of carbon dioxide at 95 °C, approximately 55 wt % of the binder could be removed, and this was mainly the dioctyl phthalate component. The use of entrainers such as 2-propanol, methyl isobutyl ketone, and n-hexane was seen to have negligible effect on the degree of binder removal. The dielectric constant, loss tangent, and breakdown voltage of devices processed by supercritical extraction were similar as compared to devices processed by thermal oxidation alone. Although it was not possible to extract all of the binder with supercritical carbon dioxide, removal of the DOP fraction increases the pore space in the body by a factor of two. Transport model calculations indicate this partial removal of binder mitigates the buildup of pressure in the subsequent thermal processing step and can reduce the processing time for thermal removal of the remaining binder by a factor of 25.
Similar content being viewed by others
References
T. Chartier, M. Ferrato and J. F. Baumard, J. Am. Ceram. Soc. 78 (1995) 1787.
I. E. Pinmill, M. J. Edirisinghe and M. J. Bevis, J. Mat. Sci. 27 (1992) 4381.
F. F. Lange, B. I. Davis and E. J. Write, J. Am. Ceram. Soc. 69 (1989) 66.
D. W. Matson and R. D. Smith, ibid. 72 (1989) 871.
L. C.-K. Liau, B. Peters, D. S. Krueger, A. Gordon, D. S. Viswanath and S. J. Lombardo, ibid. 83 (2000) 2645.
S. A. Matar, M. J. Edirisinghe, J. R. G. Evans and E. H. Twizell, ibid. 79 (1996) 749.
C. Dong and H. K. Bowen, ibid. 72 (1989) 1082.
B. Peters and S. J. Lombardo, to appear in J. Mater. Sci Mater. Electron. 12 (2001) 403.
S. Nakajima, S. Yasuhara and M. Ishihara, US Pat. 4,731,208 (1988).
T. Miyashita, Y. Ueno, H. Nishio and S. Kubodera, US Pat. 4,737,332 (1988).
E. Nishikawa, N. Wakao and N. Nakashima, J. Supercrit. Fluids 4 (1991) 265.
T. Chartier, E. Delhomme and J. F. Baumard, J. De Physique III 7 (1997) 291.
T. Chartier, E. Delhomme, J. F. Baumard, P. Marteau, P. Subra and R. Tufeu, Ind. Eng. Chem. Res. 38 (1999) 1904.
M. A. Mchugh and V. J. Krukonis, in “Supercritical Fluid Extraction: Principles and Practice” (Butterworths Publishers, Boston, MA, 1986).
V. P. Saraf and E. Kiran, J. Supercrit. Fluids 1 (1988) 37.
R. V. Shende, D. S. Krueger, G. A. Rossetti and S. J. Lombardo, J. Am. Ceram. Soc. 84 (2001) 164.
M. L. Marin, A. Jimenez, V. Berenguer and J. Lopez, J. Supercrit. Fluids 12 (1998) 271.
S. B. Hawthorne, Anal. Chem. 62 (1990) 633A.
A. F. M. Barton, in “CRC Handbook of Solubility Parameters and Other Cohesion Parameters” (CRC Press, Inc., Boca Raton, FL 1983).
D. K. Joshi and J. M. Prausnitz, A.I.Ch.E.J. 30 (1984) 522.
J. Chrastill, J. Phy. Chem. 86 (1982) 3016.
S. J. Lombardo and Z. C. Feng (manuscript in preparation).
Z. C. Feng, B. He, and S. J. Lombardo, submitted to J. of Applied Mechanics.
R. V. Shende and S. J. Lombardo, submitted to J. Am. Ceram. Soc. (2001).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shende, R.V., Krueger, D.S. & Lombardo, S.J. Supercritical extraction of binder containing poly(vinyl butyral) and dioctyl phthalate from barium titanate–platinum multilayer ceramic capacitors. Journal of Materials Science: Materials in Electronics 12, 637–643 (2001). https://doi.org/10.1023/A:1012845900170
Issue Date:
DOI: https://doi.org/10.1023/A:1012845900170