Decomposition of NO on Tungsten Carbide and Molybdenum Carbide Surfaces

Abstract

The decomposition of ¹⁵NO on C/W(111), C/W(110), and on monolayer and bulk C/Mo/W(111) surfaces is compared based on temperature-programmed desorption (TPD) and Auger electron spectroscopy (AES) measurements. Our results indicate that the decomposition of ¹⁵NO occurs readily over all surfaces, and the only ¹⁵N-containing reaction products are ¹⁵N₂ and ¹⁵N₂O under our experimental conditions. Much higher surface reactivity for ¹⁵NO decomposition was observed over the more open-structured C/W(111) surface, with a value of 0.68 ¹⁵NO/W, in contrast to the surface reactivity of 0.24 ¹⁵NO/W over the close-packed C/W(110) surface. The selectivity of these two ¹⁵N-containing reaction products depends on the structure of the substrates as well. The more open-structured C/W(111) surface favors the production of ¹⁵N₂, with a product selectivity of ¹⁵N₂ being approximately 87%. In contrast, the selectivity to ¹⁵N₂ is only about 52% on C/W(110). In addition, we have investigated the decomposition of ¹⁵NO on C/Mo surfaces that were epitaxially grown on W(111). The selectivity of ¹⁵N₂ on C/Mo/W(111) surfaces is ∼88%, which is very similar to that observed on C/W(111). Finally, the general similarity between the DeNOx chemistry on carbides and on Pt-group metals will also be discussed.