Abstract
The anodically treated and untreated (control sample) Au/-Cu/n-GaAs Schottky diodes have been prepared. The anodic oxidization process has been made on the n-GaAs substrate in aqueous \( 4C_2 H_6 O_2 + 2H_3 PO_4 \) electrolyte with pH=2.02. The anodic treatment has increased the barrier heights. We have obtained the laterally homogeneous barrier heights of approximately 0.79 and 0.91 eV for the anodically untreated and treated Au/n-GaAs SBDs, respectively, and 0.67 and 0.91 eV for the Cu/n-GaAs SBD eV respectively when accounting for the image-forge effect only. Thus, the barrier height has been increased by at least 110 and 240 meV for Au/n-GaAs and Cu/n-GaAs SBDs, respectively.
Similar content being viewed by others
References
M. T. Schmidt, Q. Y. Ma, D. V. Podlesnik, R. M. Osgood and E. S. Yang, J. Vac. Sci. Technol B 7 (1989) 980.
M. T. Schmidt, D. V. Podlesnik, C. F. Yu, X. Wu, R. M. Osgood, Jr and E. S. Yang, ibid. 6 (1988) 1436.
M. A. EbeoĞlu, F. T. Temurtas and Z. Z. ÖztÜrk, Solid-State Electron. 42 (1998) 23.
Ç. NuhoĞlu, E. Ayyildiz, M. SaĞlam and A. TÜrÜt, Appl. Surf. Sci. 135 (1998) 350.
G. M. Vanalme, L. Goubert, R. L. Van Meirhaeghe, F. Cordon and P. Van Daele, Semicond. Sci. Technol. 14 (1999) 871.
M. K. Hudait and S. B. Krupanidhi, Solid-State Electron. 44 (2000) 1089.
Ç. NuhoĞlu, M. SaĞlam and A. TÜrÜt, Semicond. Sci. Technol. 14 (1998) 114.
Z. Chen, W. Kim, A. Salvador, S. N. Mohammed, O. Aktas and H. MorkoÇ, J. Appl. Phys. 78 (1995) 3920.
R. L. Van Meirhaeghe, W. H. LaflÉre and F. Cardon, ibid. 76 (1994) 403.
M. SaĞlam, A. TÜrÜt, Ç. NuhoĞlu, H. EfeoĞlu, T. KiliÇoĞlu and M. A. EbeoĞlu, Appl. Phys. A 65 (1997) 33.
W. E. Spicer, P. W. Chye, P. R. Skeath and I. Lindau, J. Vac. Sci. Technol 16 (1979) 1422.
W. E. Spicer, L. Lindau, P. Skeath and C. Y. Su, ibid. 17 (1980) 1019.
N. Newman, M. Van Schilfgarde, T. Kendelwicz, M. D. Williams and W. E. Spicer, Phys. Rev. B. 33 (1986) 1146.
W. MÖnch, ibid. 37 (1988) 7129.
W. MÖnch, J. Vac. Sci. Technol B. 17 (1999) 1867.
H. W. HÜbers and H. P. RÖser, J. Appl. Phys. 84 (1998) 5326.
E. H. Rhoderick and R. H. Williams, “Metal-Semiconductor Contacts” (Clarendon Press, Oxford University Press, 1988) p.20, 48.
S. M. Sze, “Physics of Semiconductor Devices”, 2nd Edn (Wiley, New York, 1981).
A. M. Cowley and S. M. Sze, J. Appl. Phys. 36 (1965) 3212.
J. H. Werner, Appl. Phys. A 47 (1988) 291.
F. E. Jones, B. P. Wood, J. A. Myers, C. Daniels-Hafer and M. C. Lonergan J. Appl. Phys. 86 (1999) 6431.
M. SaĞlam and A. TÜrÜt Semicond. Sci. Technol. 12 (1997) 1028.
J. P. Sullivan, R. T. Tung, M. R. Pinto and W. R. Graham, J. Appl. Phys. 70 (1991) 7403.
J. H. Werner and H. H. GÜttler, ibid. 69 (1991) 1522.
Y. P. Song, R. L. Van Meirhaeghe, W. H. LaflÉre and F. Cardon, Solid-State Electron. 29 (1986) 633.
D. Mui, S. Strite and H. MorkoÇ, ibid. 34 (1991) 1077.
S. F. J. Fonash, J. Appl. Phys. 54 (1983) 1966.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Biber, M., Çakar, M. & Türüt, A. The effect of anodic oxide treatment on n-GaAs Schottky barrier diodes. Journal of Materials Science: Materials in Electronics 12, 575–579 (2001). https://doi.org/10.1023/A:1012441619984
Issue Date:
DOI: https://doi.org/10.1023/A:1012441619984