Abstract
This short history of experiments in Solid Mechanics is written especially for my good friend Giulio Maier 'Dilecte Julius Magister praeclare tibi gratias agimus atque continuas magnas contributiones tuas mechanicae scientiae advocamus ad multos annos'. This is the reason why it is written in French, so beautifully spoken by him. It is divided into four parts. (1) Before the 16th century where no real methodology for experiments exists, the nice buildings which still remain are the result of previous successes and defeats. (2) From the 16th to the 19th centuries this is the birth and development of theoretical and experimental tools of the strength of materials. From Leonardo da Vinci to J. Baushinger or Wöhler, the concepts of stresses and strains are formulated and machines are invented to measure the mechanical characteristics of materials. (3) The 20th century where ultimate properties of materials such as plasticity, fracture, and damage are studied and used for safety purposes. (4) The end of the 20th century and the 21th (! ! !) is the time of numerical modelling which needs experiments at the microscale to take into consideration the real phenomena and at the macroscale to check the health of structures during their service.
Sommario. Questa breve storia della sperimentazione in Meccanica dei Solidi è scritta in particolare per il mio caro amico Giulio Maier 'Dilecte Julius Magister praeclare tibi gratias agimus atque continuas magnas contributiones tuas mechanicae scientiae advocamus ad multos annos'. Per questa ragione il lavoro è scritto in francese, lingua da lui ben conosciuta. Questa nota è divisa in quattro parti. (1) Prima del 16° secolo, quando non esiste una vera metodologia sperimentale e il bell'edificio è il risultato di precedenti successi ed insuccessi. (2) dal 16° al 19° secolo ove si registra la nascita e lo sviluppo degli strumenti teorici e sperimentali per la scienza delle costruzioni. Da Leonardo da Vinci a J. Baushinger o Wöhler, vengono formulati i concetti di sforzo e deformazione e vengono inventate macchine per la misura delle caratteristiche meccaniche dei materiali. (3) Il 20° secolo, in cui le proprietà ultime dei materiali come la plasticità, la frattura ed il danneggiamento vengono studiate ed utilizzate per la verifica di sicurezza. (4) La fine del 20° secolo ed il 21°(!!!) secolo costituiscono il tempo della modellazione numerica che necessita da un lato di esperimenti condotti alla micro-scala al fine di poter considerare i fenomeni reali e dall'altro di esperimenti condotti alla macro-scala per verificare l'integrità delle strutture in condizioni di esercizio.
Similar content being viewed by others
References
Benvenuto, E., An Introduction to the History of Structural Mechanics I and II, Springer-Verlag, Heidelberg, Germany, 1991.
Germain, P., Mécanique (Introduction), Ellipses - Ecole Polytechnique, Palaiseau, France, 1986.
Gordon, J.E., The New Science of New Materials 1968-1978 (or Why You Don't Fall Through the Floor !); Structures 1978-1979 (or Why Things Don't Fall Down !), Penguin Books, Harmondsworth, U.K.
Hill, R., The Mathematical Theory of Plasticity (Introduction), Clarendon Press, Oxford, U.K., 1950.
Mach, E., The Science of Mechanics, The Open Court Publ. Comp. La Salle, U.S.A., 1893-1974.
Timoshenko, S.P., History of Strength of Materials, Dover Publishers, New York, U.S.A., 1953-1983.
Grand Larousse Encyclopédique, 1970.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lemaitre, J. Petite Histoire de L'experimentation en Mecanique des Solides. Meccanica 36, 13–35 (2001). https://doi.org/10.1023/A:1011977806453
Issue Date:
DOI: https://doi.org/10.1023/A:1011977806453