Abstract
Direct and inverse problems of thermal design of a plane multilayer lining serving under a stationary regime are formulated. Formulas for solving the direct problem aimed at computing the temperature field of the cross section of the lining and the inverse problem aimed at computing the thickness of layers in the cross section of the lining are derived. It is suggested that the computation of the temperature field in the cross section of the lining should be performed by the method of solving the direct problem, while the thickness of its cross section should be determined by the method of solving the inverse problem.
Similar content being viewed by others
REFERENCES
M. A. Mikheev and I. M. Mikheeva, Fundamentals of Heat Transfer [in Russian], Énergiya, Moscow (1977).
V. P. Isachenko, V. A. Osipova, and A. S. Sukomel, Heat Transfer [in Russian], Énergoizdat, Moscow (1981).
S. S. Kutateladze and V. M. Borishanskii, A Handbook on Heat Transfer [in Russian], Gosenérgoizdat, Moscow — Leningrad (1959).
A. V. Lykov, Heat and Mass Transfer, A Handbook [in Russian], Énergiya, Moscow (1971).
P. V. Levchenko, Design of Furnaces and Driers in the Silicate Industry [in Russian], Vysshaya Shkola, Moscow (1968).
V. P. Linchevskii, Heating Furnaces [in Russian], Metallurgizdat, Moscow (1948).
S. V. Khizhnyakov, Practical Design of Thermal Insulation of Industrial Equipment and Pipelines [in Russian], Énergiya, Moscow — Leningrad (1964).
E. R. G. Eckert and R. M. Drake, Jr., Heat and Mass Transfer [Russian translation], Gosenérgoizdat, Moscow — Leningrad (1961).
A. Schack, Industrial Heat Transfer [Russian translation], Metallurgizdat, Moscow (1961).
W. C. McAdams, Heat Transfer [Russian translation], Metallurgizdat, Moscow (1961).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tyutin, N.A. Direct and Inverse Problems of Thermal Design of a Lining under Stationary Regime. Refractories and Industrial Ceramics 42, 88–90 (2001). https://doi.org/10.1023/A:1011313623128
Issue Date:
DOI: https://doi.org/10.1023/A:1011313623128