Improving Design and Fault Detection in Linear and Nonlinear High Frequency Circuits by Performing a Sensitivity Based Analysis

Abstract

The rapid growth of wirelesscommunication has led to an increasing demand forreliable and high performance RF products. Oneway of achieving high reliability andperformances is having an efficient testprocedure. Considering the complexity of analogtesting and the high frequency constraints,testing RF circuits introduces a new challenge tothe test community. In this paper, a test methodfor RF circuits is presented. This test methoddivides RF circuits between linear and nonlinearcircuits. It helps perform a quick and efficienttest with a limited number of test vectors. Byusing this method the design engineer candetermine parameters influencing the circuitperformances and the best topology that can beused to improve these performances. On the otherhand, it helps a test engineer to plan his teststrategy and to predict which elements can beisolated by a given test set.

This is a preview of subscription content, access via your institution.

References

  1. 1.

    Tsai, S., “Test vector generation for linear analog devices.” International Test Conference, pp. 592-597, 1991.

  2. 2.

    Nagi, N., Chatterjee, A., Balivada, A., and Abraham, J. A., “Fault-based automatic test generator for linear analog circuits.” ICCAD, pp. 88-91, 1993.

  3. 3.

    Soma, M., “Probabilistic measures of fault equivalence in mixedsignal systems,” VLSI Test Symposium, pp. 67-70, 1991.

  4. 4.

    Slamani, M. and Kaminska, B., “Multifrequency analysis of faults in analog circuits.” IEEE Design and Test of Computers, pp. 70-80, May 1995.

  5. 5.

    Slamani, M. and Kaminska, B., “Fault observability analysis of analog integrated circuits in frequency domain.” IEEE Transactions on Circuits and Systems, pp. 134-139, February 1996.

  6. 6.

    Veillette, B. R. and Roberts, G. W., “A built-in-self-test for wireless communication systems,” International Test Conference, pp. 930-939, 1995.

  7. 7.

    Jarwala, M., Le, D., and Heutmaker, M. S., “End-to-end strategy for wireless systems,” International Test Conference, pp. 940-946, 1995.

  8. 8.

    Heutmaker, M., Wu, E., and Welch, J. R., “Using digital modulation to measure the gain compression and phase distorsion of an RF Amplifier,” 46th ARFTG Conference Digest, p. 56, 1995.

  9. 9.

    Heutmaker, M., Welch, J. R., and Wu, E., “Using digital modulation to measure and model RF amplifier distorsion,” Wireless Communications Conference, 1996.

  10. 10.

    “Using Vector Signal Magnitude Measurement to Analyze and Troubleshoot Vector-Modulated Signals,” Hewlett Packard Product Note 89400-14, 1996.

  11. 11.

    Sylla, I. T., et al., “Joint design and test consideration in high frequency circuits.” Microwave and Optical Technology Letters 16(3), pp. 132-138, October 1997.

    Article  Google Scholar 

  12. 12.

    “RF Power Device Impedances: Practical Considerations,” Motorola Semiconductor Application Note AN1526.

  13. 13.

    Gonzalez, Guillermo, Microwave Transistor Amplifiers, 2nd ed., Prentice Hall.

  14. 14.

    Maas, S. A., Nonlinear Circuits Analysis, Artech House, 1988.

  15. 15.

    Meehan, Michael D., Yield and Reliability in Microwave Circuit and System Design, John Purviance, Artech House.

  16. 16.

    Fidler, J. K., “Differential-incremental sensitivity relationships.” Electronic Letters 20(10), pp. 626-627, May 1984.

    Google Scholar 

  17. 17.

    Slamani, M. and Kaminska, B., “Analog circuit fault diagnosis based on sensitivity computation and functional testing.” IEEE Design and Test of Computers, pp. 30-39, March 1992.

  18. 18.

    Haley, S. B., “Large change response sensitivity of linear networks.” IEEE Trans. on Circuits and Systems CAS-27(4), pp. 305-310, April 1980.

    MathSciNet  Article  Google Scholar 

Download references

Author information

Affiliations

Authors

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Sylla, I.T., Slamani, M. Improving Design and Fault Detection in Linear and Nonlinear High Frequency Circuits by Performing a Sensitivity Based Analysis. Analog Integrated Circuits and Signal Processing 27, 249–260 (2001). https://doi.org/10.1023/A:1011297622705

Download citation

Keywords

  • Transmission Line
  • Fault Detection
  • Test Engineer
  • Test Vector
  • Isol