Abstract
The physical principles of the operation of an acoustic anemometer are considered. An improved model of the anemometer channel, which takes into account the thickness of the waveguide-air duct walls is described. The results of a calculation of the reflection coefficient of the open end of a waveguide with rectangular flanges for one of the normal modes when there is an air flow are presented. The acoustic pressure field on the wall of the anemometer channel is calculated and the effect of the wall thickness on the choice of the optimum acoustic anemometer parameters is estimated.
Similar content being viewed by others
References
S. Z. Shkundin and V. B. Lashin, Metrologiya, No. 7, 39 (1990).
A. D. Lapin, Acousto-Aerodynamic Research [in Russian], A. V. Rimskii-Korsakov (ed.), Moscow (1975), p. 57.
S. Z. Shkundin, A. M. Bondarev, and A. A. Likhachev, Izv. Vyssh. Ucheb. Zaved. Gornyi Zhurnal, No. 9, 7 (1987).
K. Ogimoto, UTIAS Report No. 231 (1978).
O. A. Kremleva, “Improvement of the acoustic method of measuring the velocity parameters of gas-air flows in mine workings,” Author's Abstract of Engineering Sciences Candidate Dissertation, Moscow (1997).
Y. Ando, Acustica, 22, 219 (1969/70).
R. Mittra and S. V. Lie, Analytical Methods of Waveguide Theory [Russian translation], Mir, Moscow (1974).
L. A. Vainshtein, Diffraction Theory and the Factorization Method [in Russian], Sovetskoe Radio, Moscow (1966).
B. Noble, The Use of the Wiener-Hopf Method to Solve Partial Differential Equations [Russian translation], IL, Moscow (1962).
D. S. Jones, Phil. Trans. Roy. Soc. London, 247, No. 934, 499 (1955).
Rights and permissions
About this article
Cite this article
Shkundin, S.Z., Rumyantseva, V.A. Increasing the Accuracy of Measurements of Air Flow Velocity with an Acoustic Anemometer. Measurement Techniques 44, 87–92 (2001). https://doi.org/10.1023/A:1010985216958
Issue Date:
DOI: https://doi.org/10.1023/A:1010985216958