This is a preview of subscription content, log in via an institution to check access.
REFERENCES
I. A. Borisov, “Disintegration of austenite grains in large forgings of steel 25KhN3MFA,” Metalloved. Term. Obrab. Met., No. 2, 2–5 (1978).
I. A. Borisov, “Heat treatment of critical parts in power engineering,” Metalloved. Term. Obrab. Met., No. 9, 2–6 (1979).
É. Gudremon, Special Steels, Vol. 1 [Russian translation], Metallurgiya, Moscow (1966), pp. 533–570.
I. A. Borisov, “Properties and defects of large forgings,” Metalloved. Term. Obrab. Met., No. 8, 12–15 (1998).
E. T. Dolbenko, A. I. Surovtsev, and I. A. Borisov, “Prospects of development of the technology and equipment for heat treatment of large forgings: A review,” in: Technology, Organization of Production, and Control, No. 6–79–06[in Russian], NIIÉinforménergomash, Moscow (1979), pp. 14–31.
I. A. Borisov and A. I. Borisov, “Modeling of the main parameters of treatment of large forgings,” Metalloved. Term. Obrab. Met., No. 8, 16–18 (1995).
A. I. Kovalev, M. V. Sonina, I. A. Borisov, et al., “Effect of the nickel and chromium content on the nature of fracture of lowcarbon Cr – Ni – Mo – V steels,” in: Use of New Materials and Alloys, No. 14–76–16 [in Russian], NIIinformtyazhmash, Moscow (1976), pp. 15–17.
I. A. Borisov, V. P. Rabinovich, K. A. Mirakova, et al., “Effect of the structure on brittle strength of structural steels,” in: Technology, Organization of Production, and Control, No. 4–78–05 [in Russian], NIIÉinforménergomash, Moscow (1978), pp. 30–31.
I. A. Borisov and G. S. Kark, “Temper brittleness of steels for rotors of powerful steam turbines,” in: Technology, Organization of Production, and Control, No. 8 [in Russian], NIIÉinforménergomash, Moscow (1982), pp. 3–44.
I. A. Borisov, “Effect of carbon, chromium, and nickel on the carbide transformation in Cr – Ni – Mo – V steels in tempering,” Metalloved. Term. Obrab. Met., No. 9, 30–33 (1990).
I. A. Borisov, “Effect of carbon, chromium, and nickel on the a α ⇄ γ transformation and properties of Cr – Ni – Mo – V steels,” Metalloved. Term. Obrab. Met., No. 3, 7–9 (1996).
I. A. Borisov, A. N. Minkov, and V. S. Sheiko, “Controlled quenching of large parts in air-water cooling devices,” Metalloved. Term. Obrab. Met., No. 2, 2–5 (1990).
I. A. Borisov, “Effect of impurities on the susceptibility of rotor steels to brittle fracture,” in: Technology, Organization of Production, and Control, No. 5–80–08 [in Russian], NIIÉinforménergomash, Moscow (1980), pp. 11–13.
A. P. Gulyaev, Metal Science [in Russian], Metallurgiya, Moscow (1977).
I. A. Borisov, A. A. Astaf'ev, N. P. Kateeva, et al., “Technology of heat treatment of steel 25Kh2NMFA as applied to welded rotor parts,” in: Technology of Heat Treatment of Rotor Forgings for Turbines and Turbogenerators, No. 13–74–2 [in Russian], NIIinformtyazhmash, Moscow (1974), pp. 2–4.
I. A. Borisov, Yu. M. Nikitin, and E. V. Slezkina, “Technical and service properties of steels for welded turbine rotors,” Metalloved. Term. Obrab. Met., No. 1, 12–16 (1998).
I. A. Borisov, “Regime of final heat treatment of rotors,” in: Heat Treatment of Integral-Disk Rotors of Turbogenerators with a Power of 800 and 1200 MW, Coll. Works, No. 13–76–2 [in Russian], NIIinformtyazhmash, Moscow (1976), pp. 11–14.
I. A. Borisov, “Study of the properties of integral-disk rotors of generators from steel 36KhN3MFA,” Metalloved. Term. Obrab. Met., No. 1, 12–16 (1999).
N. E. Naumchenkov, O. V. Filimonova, and I. A. Borisov, “Fatigue resistance of a Cr – Ni – Mo – V steel,” Énergomashinostroenie, No. 1, 32–35 (1985).
Rights and permissions
About this article
Cite this article
Borisov, I.A. Some Aspects of the Alloying Theory for Turbine and Generator Rotor Steels. Metal Science and Heat Treatment 43, 107–111 (2001). https://doi.org/10.1023/A:1010593216614
Issue Date:
DOI: https://doi.org/10.1023/A:1010593216614