REFERENCES
N. P. Lyakishev, Yu. L. Pliner, and S. I. Lappo, Boron-Bearing Steels and Alloys [in Russian], Metallurgiya, Moscow (1986).
V. A. Zolot'ko, “On the possibility of manufacturing piston pins of diesel engines from steel 18KhGT using mechanochemical and heat hardening,” Metalloved. Term. Obrab. Met., No. 6, 33–35 (1997).
A. K. Tikhonov, Yu. A. Lavrenenko, Yu. A. Urusov, and Yu. M. Palagin, “Low-alloy boron bearing steels for high-strength fixtures,” in: Reliability and Quality in Industry, Power Engineering, and Transport, Proc. Int. Conf. (Samara, 6 – 8 October, 1999), Part 1 [in Russian] (1999), pp. 155–158.
M. V. Bobylev, Yu. A. Lavrinenko, N. I. Sardaev, and A. S. Kochergin, “Control of the quality of boron-bearing steels for automobile parts,” in: Abs. Rep. Int. Sci. Pract. Conf. “Materials in Automaking” (18 – 20 June, 1998) [in Russian], Tolyatti (1998), pp. 45–46.
V. B. Nosov and S. A. Yurasov, “Computation of the hardenability of boron-containing steels,” Metalloved. Term. Obrab. Met., No. 3, 19–22 (1995).
Round Calibrated and Turned Steel of Grade 12KhN for Cold Upset, TU 14-1-3260–81 [in Russian].
A. K. Tikhonov, “Materials for automobiles,” Metalloved. Term. Obrab. Met., No. 10, 20–25 (1987).
V. N. Gridnev, V. G. Gavrilyuk, and Yu. A. Meshkov, Strength and Ductility of Cold-Deformed Steel [in Russian], Naukova Dumka, Kiev (1974).
D. Lupton and D. Warington, Metal Sci., 6, 200–204 (1972).
D. McLin, Grain Boundaries in Metals [Russian translation], Metallurgizdat, Moscow (1960).
S. S. Gorelik, Recrystallization of Metals and Alloys [in Russian], Metallurgiya, Moscow (1978).
L. M. Utevskii, Temper Brittleness of Steel [in Russian], Metallurgizdat, Moscow (1961).
A. K. Tikhonov, “Chemicothermal treatment in large-scale production,” Metalloved. Term. Obrab. Met., No. 1, 15–18 (1996).
A. K. Tikhonov and N. N. Ponomarev, “Special features of design and service of Holcroft automatic lines for chemicothermal treatment,” Metalloved. Term. Obrab. Met., No. 11, 16–18 (1996).
N. A. Matveev (ed.), Determination of the Hardenability of Carburized and Nitrocarburized Layers, RTM 37.002.0224–76 [in Russian], NIITAVTOPROM, Moscow (1976).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tikhonov, A.K., Shenderei, P.É. & Sardaev, N.I. Use of Boron-Bearing Steel 12GR for Manufacturing Piston Pins for VAZ Engines. Metal Science and Heat Treatment 43, 26–29 (2001). https://doi.org/10.1023/A:1010414121252
Issue Date:
DOI: https://doi.org/10.1023/A:1010414121252