Abstract
It is proposed that bond coats in thermal-barrier coating (TBC) systems, particularly those deposited by plasma spraying, can contain regions which are diffusionally isolated from the bulk of the coating. This can arise through the internal formation of alumina layers as a consequence of the ingress of molecular oxygen into the relatively porous structure. Such isolated regions, termed diffusion cells, will experience enhanced depletion of aluminum as a result of the continued thickening of the alumina layer at their surface. This process has been demonstrated for a CoNiCrAlY bond coat after oxidation in air at 1100°C. A consequence of this enhanced depletion is that chemical failure will occur sooner in diffusion cells and voluminous breakaway oxides will form above them at the interface of the bond coat and the ceramic top coat. The associated spatial variation in oxidation and displacement rates across the surface of the bond coat are expected to aid delamination of the outer ceramic layer.
Similar content being viewed by others
References
J. R. Nicholls, J. Minerals Met. Mater. Soc. 52, 28 (2000).
D. J. Wortman, B. A. Nagaraj, and E. C. Dunderstadt, Mater. Sci. Eng. A121, 433 (1989).
J. T. Demasi-Marcin, K. D. Scheffler, and S. Bose, J. Eng. Gas Turbines Power 112, 521 (1990).
A. H. Bartlett and R. D. Maschio, J. Amer. Ceram. Soc. 78, 1018 (1995).
J. A. Haynes, E. D. Rigney, M. K. Ferber, and W. D. Porter, Surf. Coat. Technol. 86–87, 102 (1996).
M. D. Thouless, H. M. Jensen, and E. G. Liniger, Proc. R. Soc. London A447, 271 (1994).
J. W. Hutchinson and Z. Suo, Advan. Appl. Mech. 29, 63 (1992).
Sung Ryul Choi, J. W. Hutchinson, and A. G. Evans, Mech. Mater. 31, 431 (1999).
V. Sergo and D. R. Clarke, J. Amer. Ceram. Soc. 81, 3237 (1998).
J. S. Wang and A. G. Evans, Acta Mater. 47, 699 (1999).
P. Niranatlumpong, Ph. D. Thesis, The University of Birmingham, Birmingham, U.K., 2000.
P. Niranatlumpong, C. B. Ponton, and H. E. Evans, Oxid. Met. 53, 241 (2000).
E. A. G. Shillington and D. R. Clarke, Acta. Mater. 47, 1297 (1999).
H. E. Evans, A. T. Donaldson, and T. C. Gilmour, Oxid. Met. 52, 379 (1999).
C. S. Giggins and F. S. Pettit, J. Electrochem. Soc. 118, 1782 (1971).
J. P. Wilber, M. J. Bennett, and J. R. Nicholls, Mater. High Temp. 17, 125 (2000).
F. S. Pettit, private communication (1999).
D. P. Whittle, Corros. Sci. 12, 869 (1972).
H. C. Cowen and S. J. Webster, Corrosion of Steels in CO2 (British Nuclear Energy Society, London, 1974), p. 349.
H. Hindum and D. P. Whittle, Oxid. Met. 18, 245 (1983).
J. A. Nesbitt and R. W. Heckel, Metall. Trans. 18A, 2075 (1987).
G. W. Roper and D. P. Whittle, Met. Sci. 15, 148 (1981).
W. J. Quadakkers, J. Jedlinski, K. Schmidt, M. Krasovec, G. Borchardt, and H. Nickel, Appl. Surf. Sci. 47, 261 (1991).
M. P. Taylor, P. Niranatlumpong, H. E. Evans, and C. B. Ponton, Mater. High Temp. 17, 219 (2000).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Evans, H.E., Taylor, M.P. Diffusion Cells and Chemical Failure of MCrAlY Bond Coats in Thermal-Barrier Coating Systems. Oxidation of Metals 55, 17–34 (2001). https://doi.org/10.1023/A:1010369024142
Issue Date:
DOI: https://doi.org/10.1023/A:1010369024142