Abstract
Ti6Al4V foils, 100 μm thick, were coated with thin (10–15 μm) bond coats based on titania and zirconia, and subsequently coated with a thick (100–120 μm) hydroxyapatite layer, using atmospheric plasma spraying. Peel adhesion tests of the coating systems performed on the foils showed that titania, and mixed titania/non-stabilized zirconia bond coats improved the adhesion of the ceramic layers to the metallic substrate in a statistically significant way, while a partially CaO-stabilized zirconia bond coat led to a decrease of the peel adhesion strength when compared to hydroxyapatite coatings without a bond coat.
Similar content being viewed by others
References
K. de Groot, R. T. G. Geesink, C. P. A. T. Klein and P. Serekian, J. Biomed. Mater. Res. 21 (1987) 1375.
C. P. A. T. Klein, P. Patka, H. B. M. van der Lubbe, J. G. C. Wolke and K. de Groot, ibid. 25 (1991) 53.
H. Caulier, J. P. C. M. van der Waerden, J. G. C. Wolke, W. Kalk, I. Naert and J. A. Jansen, in “Materials in Clinical Application”, edited by P. Vincenzini (Techna Srl, 1995) p. 477.
R. McPherson, N. Gane and T. J. Bastow, J. Mater. Sci. Mater. Med. 6 (1995) 327.
R. B. Heimann, T. A. Vu and M. L. Wayman, Europ. J. Mineral., 9 (1997) 597.
K. SØballe, H. B. Rasmussen, E. S. Hansen and C. Buenger, Acta Orthop. Scand. 63(2) (1992) 128.
C. Y. Yang, B. C. Wang, E. Chang and J. D. Wu, J. Mater. Sci. Mater. Med. 6 (1995) 249.
R. B. Heimann and T. A. Vu, J. Thermal Spray Technol., 6(2) (1997) 145.
R. B. Heimann, “Plasma Spray Coating, Principles and Applications” (VCH, Weinheim, 1996).
J. Weng, X. Liu, X. Zhang and X. Ji, J. Mater. Sci. Lett. 13 (1994) 159.
H. Ji, C. B. Ponton and P. M. Marquis, J. Mater. Sci. Mater. Med. 3 (1992) 283.
M. L. Pereira, A. M. Abreu, J. P. Sousa and G. S. Carvalho, ibid. 6 (1995) 523.
H. Tomas, G. S. Carvalho, M. H. Fernandes, A. P. Freire and L. M. Abrantes, ibid. 7 (1996) 291.
K. SØballe, Acta Orthop. Scand., 64(255) (1993) 58.
D. Lamy, A. C. Pierre and R. B. Heimann, J. Mater. Res. 11 (1996) 680.
T. A. Vu and R. B. Heimann, Second Interim Report SMWK Project no. 7541.82-0390/414, 15 February 1996.
P. F. Keeting, M. J. Oursler, K. E. Wiegand, S. K. Bonds, T. C. Spelsberg and B. L. Riggs, J. Bone Miner. Res. 7 (1992) 1281.
L. L. Hench, Thermochimica Acta 280/281 (1996) 1.
M. Tanahashi, T. Yao, T. Kokubo, M. Minoda, T. Miyamoto, T. Nakamura and T. Yamamuro, J. Mater. Sci. Mater. Med. 6 (1995) 319.
Y. Ebisawa, T. Kokubo, K. Ohura and T. Yamamuro, ibid. 1 (1990) 239.
K. Ogawa, N. Nagata and T. Yogoro, Onoda Research Report 43 (1991) 2nd book, No. 125, 46 (in Japanese).
H. Kurzweg, PhD thesis, Freiberg University of Mining and Technology, Germany, in progress.
R. B. Heimann, “Plasma Spray Coating. Principles and Applications” (VCH, Weinheim, 1996) p. 248-61.
M. J. Filiaggi, N. A. Combs and R. M. Pilliar, J. Biomed. Mater. Res. 25 (1991) 1211.
M. Sexsmith and T. Troczynski, J. Thermal Spray Technol. 3 (1994) 404.
A. Crocombe and R. Adams, J. Adhes. 12 (1981) 127.
M. Sexsmith, T. Troczynski and E. Breslauer, J. Adhes. Sci. Technol., 11(2) (1997) 141.
M. Sexsmith, MASc thesis, The University of British Colombia (1995).
M. Sexsmith and T. Troczynski, J. Thermal Spray Technol. 5 (1996) 196.
E. Breslauer and T. Troczynski, ibid., submitted.
L. E. Samuels, “Metallographic Polishing by Mechanical Methods” (ASM Metals Park, OH, 1982) p. 288.
R. Storm, “Wahrscheinlichkeitsrechnung, mathematische Statistik und statistische Qualitätskontrolle” (Fachbuchverlag, Berlin, 1995) pp. 253-6.
M. O. Figueiredo and A. Correia dos Santos, in “Zirconia'88. Advances in Zirconia Science and Technology”, edited by S. Meriani, C. Palmonari (Elsevier Applied Sciences, London, New York, 1989) p. 81.
S. F. Hulbert, S. J. Morrison and J. J. Klawitter, J. Biomed. Mater. Res. 6 (1972) 347.
C. C. Ribeiro, M. A. Barbosa, A. A. S. C. Machado, A. Tudor and M. C. Davies, J. Mater. Sci. Mater. Med. 6 (1995) 829.
D. Matejka, V. Palka and I. Infner, in “IV. Workshop Plasmatechnik”, edited by G. Nutsch 14-15 October 1996 (TU, Ilmenau, 1996).
J. M. Houben, PhD thesis, Technical University Eindhoven, The Netherlands (1988).
L. L. Hench and J. Wilson, “An Introduction to Bioceramics” (World Scientific, London, 1993). ??
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
KURZWEG, H., HEIMANN, R.B. & TROCZYNSKI, T. Adhesion of thermally sprayed hydroxyapatite–bond-coat systems measured by a novel peel test. Journal of Materials Science: Materials in Medicine 9, 9–16 (1998). https://doi.org/10.1023/A:1008822309486
Issue Date:
DOI: https://doi.org/10.1023/A:1008822309486