Abstract
This paper deals with dynamic fracture toughness testing of small beam specimens. The need for testing such specimens is often dictated by the characteristic dimensions of the end product. We present a new methodology which combines experimentally determined loads and fracture time, together with a numerical model of the specimen. Calculations are kept to a minimum by virtue of the linearity of the problem. The evolution of the stress intensity factor (SIF) is obtained by convolving the applied load with the calculated specimen response to unit impulse force. The fracture toughness is defined as the value of the SIF at fracture time. The numerical model is first tested by comparing numerical and analytical solutions (Kishimoto et al., 1990) of the impact loaded beam. One point impact experiments were carried out on of commercial tungsten base heavy alloy specimens. The robustness of the method is demonstrated by comparing directly measured stress intensity factors with the results of the hybrid experimental-numerical calculation. The method is simple to implement, computationally inexpensive, and allows testing of large sample sizes, without restriction on the specimen geometry and type of loading.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
ANSYS, User's Manual (1994). Swanson Analysis Systems Inc.
Aoki, S. and Kimura, T. (1993). 'Finite element study of the optical method of caustic for measuring impact fracture toughness'. Journal of the Mechanics and Physics of Solids 41 (3), 413–425.
ASTM (1993). Standard test method for plane-strain fracture toughness of metallic materials. Annual Book of ASTM Standards, Vol. 03.01, ASTM, Philadelphia, PA.
Bathe, K.J. (1982). Finite Element Procedures in Engineering Analysis, Prentice Hall Inc., Englewood Cliff, N.J.
Barsoum, R.S. (1978). 'On the use of isoparametric finite elements in linear elastic fracture mechanics'. International Journal of Numerical Methods in Engineering 10, 25–37.
Beinert, J. and Kalthoff, J.F. (1981). 'Experimental determination of dynamic stress intensity factors by shadow patterns'. Mechanics of Fracture 7 (Edited by Sih, G.C.), 281–330.
Bonenberger, R.J., Dally, J.W. and Irwin, G.R., (1993). 'Lower bound initiation toughness with a modified Charpy specimen'. ASTM STP 1171, 139–157.
Bui, H.D., Maigre, H. and Rittel, D. (1992). 'A new approach to the experimental determination of the dynamic stress intensity factor'. International Journal of Solids and Structures 29 (23), 2881–2895.
Dally, J.W. and Riley, W.F. (1991). Experimental Stress Analysis, 3rd Ed., McGraw-Hill, New York.
Freund, L.B. (1990). Dynamic Fracture Mechanics, Cambridge University Press, Cambridge.
Giovanola, J.H. (1986). 'Investigation and application of the one-point bend impact test'. Fracture Mechanics: Seventeenth Volume, ASTM-STP 905 (Edited by Underwood, J.H., Chait, R. et al.), 307–328.
Irwin, G.R. (1957). 'Analysis of stresses and strains near the end of a crack traversing a plate'. Journal of Applied Mechanics 24 (3), 361–364.
Kalthoff, J.F., Winkler, S., Böhme, W., Shockey, D.A. (1983). Proceedings International Conference on the Dynamical Properties and Fracture Dynamics of Engineering Materials, Brno, Czechoslovakia.
Kalthoff, J.F, Winkler, S. and Beinert J. (1977). 'The influence of dynamic effects in impact testing'. International Journal of Fracture 13, 528–531.
Kishimoto, K., Fujino, Y., Aoki, S. and Sakata, M. (1990) 'A simple formula for the dynamic stress intensity factor of an impacted freely supported bend specimen'. JSME International Journal Series I, 33 (1), 51–56.
Kobayashi, A.S. (1987). Handbook on Experimental Mechanics, Prentice-Hall, Inc., Englewood Cliffs NJ.
Kolsky, H. (1963). Stress Waves in Solids, Dover Publications Inc., New York, NY.
Lifshitz, J.M. and Leber, H. (1994). Data processing in the split Hopkinson pressure bar tests, International Journal of Impact Engineering 15 (6), 723–733.
Maigre, H. and Rittel D. (1996). 'Dynamic fracture detection using the force-displacement reciprocity: application to the compact compression specimen'. International Journal of Fracture 73 (1), 67–79.
Mason, J.J., Lambros, J. and Rosakis, A.J. (1992). 'The use of a coherent gradient sensor in dynamic mixed-mode fracture mechanics experiments'. Journal of Mechanical Physics and Solids 40 (3), 641–661.
Rittel, D. (1998). 'The influence of temperature on dynamic failure mode transitions'. Mechanics of Materials 30 (3), 217–227.
Rittel, D. and Maigre, H. (1996). 'An investigation of dynamic crack initiation in PMMA'. Mechanics of Materials 28, 229–239.
Rittel, D., Maigre, H and Bui, H.D. (1992). A new method for dynamic fracture toughness testing. Scripta Metallurgica et Materialia 26, 1593–1598.
Rokach, I.V. (1994). 'Comparison of simplified methods of dynamic stress intensity factor evaluation'. Mechanika Teoretyczna I Stosowana 1 (32), 203–212.
Wada, H. (1992). 'Determination of dynamic fracture toughness for PMMA'. Engineering Fracture Mechanics 41 (6), 821–831.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Weisbrod, G., Rittel, D. A method for dynamic fracture toughness determination using short beams. International Journal of Fracture 104, 89–103 (2000). https://doi.org/10.1023/A:1007673528573
Issue Date:
DOI: https://doi.org/10.1023/A:1007673528573