Abstract
Continuing the experiments on the double-edge notched specimens on which the mode II fracture toughness K IIc of concrete was measured, a practical testing approach to determine mode II fracture energy G IIF is studied using the same geometry.
Similar content being viewed by others
References
Arrea, M. and Ingraffea, A.R. (1981). Mixed-mode crack propagation in mortar and concrete. Department of Structural Engineering report 81-13, Cornell University.
Ballatore, M., Carpinteri, A., and Ferrara, G. (1990). Mixed-mode fracture energy of concrete. Engineering Fracture Mechanics 35, 145–157.
Barr, B. and Thomas, W.F. (1986). A study of the fracture characteristics of glass reinforced cement. Proc. Third Int. Symp. on Developments in FRC Composites, Sheffield, England.
Barr, B. (1987). The fracture characteristics of FRC materials in shear. in Fiber Reinforced Concrete Properties and Applications (Edited by Shah and Baston), 27–53, American Concrete Institute, SP-105.
Barr, B., Hasso, A. and Khalifa, S. (1987). A study of mode II shear fracture of notched beams, cylinders and cores. Proceedings, SEM-RILEM Int. Conf. on Fracture of Concrete and Rock (edited by S.P. Shah and S.E. Swartz), Houston, 370–382.
Barr, B. and Derradj, M. (1990). Numerical study of a shear (mode II) type test specimen geometry. Engineering Fracture Mechanics 35, 171–180.
Bazant, Z.P. and Pfeiffer, P.A. (1985). Tests of shear fracture and strain softening in concrete, Proceedings of the 2nd Symposium on the Interaction of Non-Nuclear Munitions with Structures, April 15-19, Panama City Beach, Florida.
Bazant, Z.P. and Pfeiffer, P.A. (1986) Shear fracture test of concrete. Materials and Structures (RILEM) 110, 111–121.
Cedolin, L., Bisi, G. and Narodello, P. (1997). Sulla determinazione sperimentale dell'energia di fracttura in modo II per il calcestruzzo. Studi e Ricerche 18.
Cedolin, L., Bisi, G. and Narodello, P. (1998). On the detection of crack propagation in Reinhardt's double-edge concrete testing specimen for mode II. Dipartmento di Ingegneria Strutturale, Politecnico di Milano.
Cramer, S. and Pugel, A. (1987). Compact shear specimen for wood mode II fracture investigations. International Journal of Fracture 35, 163–174.
Davies, J. (1991). Numerical and experimental study of development of fracture path under mixed mode loading. in Fracture Processes in Concrete, Rock and Ceramics (Edited by J.G.M. van Mier, J.A. Rots and A. Bakker), RILEM Proceedings 13, E & FN Spon, London.
Davies, J. (1998). Experimental study of crack propagation in the modified punch-through shear specimen in mixed-mode loading. Fracture Mechanics of Concrete Structures, Proceedings FRAMCOS-3, ed. H. Mihashi and K. Rokugo, Aedificatio Publishers, Freiburg, Germany, 761–771.
Davies, J. (1992). Macroscopic study of crack face bridging phenomenon in mixed-mode loading. in Fracture Mechanics of Concrete Structures (Edited by Z.P. Bazant), Elsevier Applied Science, London and New York.
Davies, J. (1995). Study of shear fracture in mortar specimens. Cement and Concrete Research 25, 1031–1042.
Ingraffea, A.R. and Panthaki, M.J. (1985). Analysis of 'shear Fracture' Tests of Concrete Beams. Finite Element Analysis of Reinforced Concrete Structures, ASCE, Tokyo, 151–173.
Iosipescu, N. (1967). New accurate procedure for single shear testing of metals. Journal of Materials 2, 537–566.
Kumosa, M. and Hull, D. (1987). Mixed-mode fracture of composites using Iosipescu shear test. International Journal of Fracture 35, 83–102.
Liu, K, Barr, B. and Watkins, J. (1985). Mode II fracture of fibre reinforced concrete materials. The International Journal of Cement Composites and Lightweight Concrete 7, 93–101.
Luong, M.P. (1990). Tensile and shear strength of concrete and rock. Engineering Fracture Mechanics 35, 127–135.
Mattock, A.H. and Hawkins, N.M. (1972). Shear transfer in reinforced concrete-recent research. ACI Journal, 55–75.
Ozbolt, J., Reinhardt, H.W. and Xu, S. (1998). Numerical studies on the double-edge notched mode II geometry. Fracture Mechanics of Concrete Structures, Proceedings FRAMCOS-3, ed. H. Mihashi and K. Rokugo, Aedificatio Publishers, Freiburg, Germany, 773–782.
Prisco, M.di and Ferrara, L. (1998). On the evaluation of mode II fracture energy in high stength concrete. Computational Modelling of Concrete Structures, de Borst, Bicanic, Mang & Meschke (eds), Balkema, Rotterdam.
Reinhardt, H.W. and Walraven, J.C. (1982). Cracks in concrete subject to shear. Journal of Structural Division, ASCE 108, 207–224.
Reinhardt, H.W., Ozbolt, J., Xu, S. and Abebe, D. (1997). Shear of structural concrete members and pure mode II testing. Advanced Cement Based Materials 5, 75–85.
Reinhardt, H.W. and Xu, S. (1998). Experimental determination of KIIc of normal strength concrete. Materials and Structures 31, 296–302.
Richard, H.A. (1981). A new compact shear specimen. International Journal of Fracture 17, R105–R107.
Irobe, M. and Pen, S.-Y. (1992). Mixed-mode and mode II fracture in of concrete. in Fracture Mechanics of Concrete Structures (Edited by Z.P. Bazant), Elsevier Applied Science, London and New York, 719–726.
Swartz, S.E., Lu, L.W., Tang, L.D. and Refai, T.M.E. (1988). Mode II fracture parameter estimates for concrete from beam specimens. Experimental Mechanics, 146–153.
Swartz, S.E. and Taha, N.M. (1990).Mixed mode crack propagation and fracture in concrete. Engineering Fracture Mechanics 35, 137–144.
Schlangen, E. (1993). Experimental and numerical analysis of fracture processes in concrete. HERON 38(2).
Tada, H., Paris, P. and Irwin, G. (1985). The Stress Analysis of Cracks Handbook (second edition). Paris Productions Incorporated, St. Louis.
van Mier, J.G.M., Nooru-Mohamed, M.B. and Timmers, G. (1991). An experimented study of shear fracture and aggregate interlock in cementbased composites. HERON 36(4), 1–104.
Xu, S., Reinhardt, H.W. and Gappoev, M. (1996). Mode II fracture testing method for highly orthotropic materials like wood. International Journal of Fracture 75, 185–214.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Reinhardt, H.W., Xu, S. A practical testing approach to determine mode II fracture energy GIIF for concrete. International Journal of Fracture 105, 107–125 (2000). https://doi.org/10.1023/A:1007649004465
Issue Date:
DOI: https://doi.org/10.1023/A:1007649004465