Skip to main content
SpringerLink
Log in

Superposition method for calculating singular stress fields at kinks, branches and tips in multiple crack arrays

  • Published:
International Journal of Fracture Aims and scope Submit manuscript

Abstract

A method is developed for calculating stresses and displacements around arrays of kinked and branched cracks having straight segments in a linearly elastic solid loaded in plane stress or plain strain. The key idea is to decompose the cracks into straight material cuts we call `cracklets', and to model the overall opening displacements of the cracks using a weighted superposition of special basis functions, describing cracklet opening displacement profiles. These basis functions are specifically tailored to induce the proper singular stresses and local deformation in wedges at crack kinks and branches, an aspect that has been neglected in the literature. The basis functions are expressed in terms of dislocation density distributions that are treatable analytically in the Cauchy singular integrals, yielding classical functions for their induced stress fields; that is, no numerical integration is involved. After superposition, nonphysical singularities cancel out leaving net tractions along the crack faces that are very smooth, yet retaining the appropriate singular stresses in the material at crack tips, kinks and branches. The weighting coefficients are calculated from a least squares fit of the net tractions to those prescribed from the applied loading, allowing accuracy assessment in terms of the root-mean-square error. Convergence is very rapid in the number of basis terms used. The method yields the full stress and displacement fields expressed as weighted sums of the basis fields. Stress intensity factors for the crack tips and generalized stress intensity factors for the wedges at kinks and branches are easily retrieved from the weighting coefficients. As examples we treat cracks with one and two kinks and a star-shaped crack with equal arms. The method can be extended to problems of finite domain such as polygon-shaped plates with prescribed tractions around the boundary.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Aliabadi, M.H. and Rooke, D.P. (1991). Numerical Fracture Mechanics, Kluwer Academic Press, Dordrecht.

    Google Scholar 

  • Atluri, S.N. (1997). Structural Integrity and Durability. Tech. Science Press, Forsyth, Georgia, U.S.A.

    Google Scholar 

  • Banks-Sills, L. (1991). Application of the finite element method to linear elastic fracture mechanics. Applied Mechanics Reviews 44, 447–461.

    Google Scholar 

  • Benveniste, V., Dvorak, G.J., Zarzour, J. and Wung, E.C.J. (1989). On interacting cracks and complex crack configurations in linear elastic media. International Journal of Solids and Structures 25, 1279–1293.

    Google Scholar 

  • Bilby, B.A. and Eshelby, J.D. (1968). Dislocations and the theory of fracture. Fracture, and Advanced Treatise(Edited by H. Liebowitz), Vol. I, Academic Press, New York, 99–182.

    Google Scholar 

  • Bogy, D.B. (1968). Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading. Journal of Applied Mechanics 35, 460–466.

    Google Scholar 

  • Chang, C. and Mear, M.E. (1995). A boundary element method for two-dimensional linear elastic fracture analysis. International Journal of Fracture 74, 219–251.

    Google Scholar 

  • Chatterjee, S.N. (1975). The stress field in the neighborhood of a branched crack in an infinite sheet. International Journal of Solids and Structures 11, 521–538.

    Google Scholar 

  • Chen, D.-H. and Nisitani, H. (1993). Singular stress field near the corner of jointed dissimilar materials. Journal of Applied Mechanics 60, 607–613.

    Google Scholar 

  • Chen, Y.Z. (1984). General case of multiple crack problems in an infinite plate. Engineering Fracture Mechanics 20, 591–597.

    Google Scholar 

  • Chen, Y.Z. and Hasebe, N. (1995). New integration schemes for the branch crack problem. Engineering Fracture Mechanics 52, 791–801.

    Google Scholar 

  • Chudnovsky, A. and Kachanov, M. (1983). Interaction of a crack with a field of microcracks. International Journal of Engineering Science 21, 1009–1018.

    Google Scholar 

  • Chudnovsky, A., Dolgopolsky, A. and Kachanov, M. (1987a). Elastic interaction of a crack with a microcrack array – I. Formulation of the problem and general form of the solution. International Journal of Solids and Structures 23, 1–10.

    Google Scholar 

  • Chudnovsky, A., Dolgopolsky, A. and Kachanov, M. (1987b). Elastic interaction of a crack with a microcrack array – II. Elastic solution for two crack configurations (piece-wise constant and linear approximations). International Journal of Solids and Structures 23, 11–21.

    Google Scholar 

  • Cotterell, B. and Rice, J.R. (1980). Slightly curved or kinked cracks. International Journal of Fracture 16, 155–169.

    Google Scholar 

  • Crouch, S.L. (1976). Solution of plane elasticity problems by displacement discontinuity method. International Journal of Numerical Methods in Engineering 10, 301–343.

    Google Scholar 

  • Cruse, T.A. (1996). BIE fracture mechanics analysis-25 years of developments. Computational Mechanics 18, 1–11.

    Google Scholar 

  • Curtin, W.A. and Scher, H. (1990a). Brittle fracture in disordered materials: A spring network model. Journal of Materials Research 5, 535–553.

    Google Scholar 

  • Curtin, W.A. and Scher, H. (1990b). Mechanics modeling using a spring network. Journal of Materials Research 5, 554–562.

    Google Scholar 

  • Datsyshin, A.P. and Savruk, M.P. (1973). A system of arbitrary oriented cracks in elastic solids. Journal of Applied Mathematics and Mechanics 37, 306–313.

    Google Scholar 

  • Dempsey, J.P. and Sinclair, G.B. (1981). On the singular behavior at the vertex of a bi-material wedge. Journal of Elasticity 11, 317–327.

    Google Scholar 

  • Dvorak, G.J., Zarzour J. and Benveniste, Y. (1992). Fracture of fibrous metal matrix composites – IV. Plastic zones, local stresses and fracture strength. Engineering Fracture Mechanics 42, 501–517.

    Google Scholar 

  • Dwyer, J.F. and Amadei, B. (1995). Application of the edge function method to rock mechanics. Rock Mechanics and Rock Engineering 28, 185–209.

    Google Scholar 

  • Dwyer, J.F. and Pan, E. (1995). Edge function analysis of stress intensity factors in cracked anisotropic plates. International Journal of Fracture 72, 327–342.

    Google Scholar 

  • Erdogan, F., Gupta, G.D. and Cook, T.S. (1973). Numerical solution of singular integral equations. Methods of Analysis and Solutions of Crack Problems(Edited by G.C. Sih), Noordhoff, Leyden, 368–425.

  • Fleming, M., Chu, Y.A., Moran, B. and Belytschko, T. (1996). Enriched element-free Galerkin methods for crack tip fields. International Journal of Numerical Methods in Engineering 40, 1483–1504.

    Google Scholar 

  • Gerasoulis, A. (1982). The use of piecewise quadratic polynomials for the solution of singular integral equations of Cauchy type. Computers and Mathematics with Applications 8, 15–22.

    Google Scholar 

  • Gong, S.X. and Horii, H. (1989). General solution to the problem of microcracks near the tip of a main crack. Journal of the Mechanics and Physics of Solids 37, 27–46.

    Google Scholar 

  • Gray, L.J. and Paulino, H. (1998). Crack tip interpolation revisited. SIAM Journal on Applied Mathematics 58, 428–455.

    Google Scholar 

  • Gross, D. (1982). Spannungsintensitätsfaktoren von Ribsystemen. Ingenieur Archiv 51, 301–310.

    Google Scholar 

  • Han, X. and Wang, T. (1996). A general method for solving the problem of both open and closed multiple cracks. International Journal of Fracture 79, R69–R72.

    Google Scholar 

  • Hayashi, K. and Nemat-Nasser, S. (1981). Energy release rate and crack kinking under combined loading. Journal of Applied Mechanics 48, 520–524.

    Google Scholar 

  • He, M.-Y. and Hutchinson, J.W. (1989). Kinking of a crack out of an interface. Journal of Applied Mechanics 56, 270–278.

    Google Scholar 

  • Hein, V.L. and Erdogan, F. (1971). Stress singularities in a two-material wedge. International Journal of Fracture Mechanics 7, 317–330.

    Google Scholar 

  • Hills, D.A., Kelly, P.A., Dai, D.N. and Korsunsky, A.M. (1996). Solution of Crack Problems: The Distributed Dislocation Technique. Kluwer Academic Publishers, Dordrecht, The Netherlands.

    Google Scholar 

  • Hoagland, R.G. and Embury, J.D. (1980). A treatment of inelastic deformations around a crack tip due to microcracking. Journal of the American Ceramic Society 63, 404–410.

    Google Scholar 

  • Hori, M. and Nemat-Nasser, S. (1987). Interacting micro-cracks near the tip in the process zone of a macro-crack. Journal of the Mechanics and Physics of Solids 35, 601–629.

    Google Scholar 

  • Horii, H. and Nemat-Nasser, S. (1985). Elastic fields of interacting inhomogenieties. International Journal of Solids and Structures 21, 731–745.

    Google Scholar 

  • Hu, K.X. and Chandra, A. (1993). Interactions among general systems of cracks and anticracks: An integral equation approach: Journal of Applied Mechanics, 920–928.

  • Jagota, A. and Bennison, S.J. (1995). Element breaking rules in computational models for brittle fracture. Modelling and Simulation in Materials Science and Engineering 3, 485–501.

    Google Scholar 

  • Kachanov, M. (1994). Elastic solids with many cracks and related problems. Advances in Applied Mechanics(Edited by J.W. Hutchinson and T.Y. Wu), Vol. 30, Academic Press, New York.

    Google Scholar 

  • Kachanov, M., Montagut, E.L. and Laures, J.P. (1990). Mechanics of crack-microcrack interactions. Mechanics of Materials 10, 59–71.

    Google Scholar 

  • Laures, J.P. and Kachanov, M. (1991). Three-dimensional interactions of a crack-front with arrays of penny-shaped microcracks. International Journal of Fracture 48, 255–279.

    Google Scholar 

  • Linkov, A.M., Zoubkov, V.V. and Heib, M.A. (1998). Computer aided analysis of stressed state and rock burst hazard in veins and coal seams influenced by faults. Submitted.

  • Lo, K.K. (1978). Analysis of branched cracks. Journal of Applied Mechanics 45, 797–802.

    Google Scholar 

  • Meguid, S.A., Gong, S.X. and Gaultier, P.E. (1991). Main crack-microcrack interaction under mode I, II and III loadings: Shielding and amplification. International Journal of the Mechanical Sciences 33, 351–359.

    Google Scholar 

  • Napier, J.A.L. (1990). Modelling of fracturing near deep level mining excavations using a displacement discontinuity approach. Mechanics of Jointed and Faulted Rock(Edited by H.P. Rossmanith), Balkema, Rotterdam, 709–715.

  • Napier, J.A.L. and Peirce, A.P. (1997). The use of a multipole expansion technique to analyse large scale fracture processes and seismic recurrence effects in deep level mines. International Journal of Rock Mechanics and Mining Sciences 34, 680–689.

    Google Scholar 

  • Niu, J. and Wu, M.S. (1997). Strong interactions of morphologically complex cracks. Engineering Fracture Mechanics 57, 665–687.

    Google Scholar 

  • Theocaris, P.S. and Ioakimidis, N.I. (1977). Numerical integration methods for the solution of singular integral equations. Quarterly of Applied Mathematics 35, 173–183.

    Google Scholar 

  • Williams, M.L. (1952). Stress singularities resulting from various boundary conditions in angular corners of plates in extension. Journal of Applied Mechanics 19, 526–528.

    Google Scholar 

  • Yang, G.-P. and Liu, X. (1993). Interaction and propagation of random microcracks in tension. Studi e Ricerche 14, 143–163.

    Google Scholar 

  • Zang, W.L. and Gudmundson, P. (1988). A boundary integral method for internal piece-wise smooth crack problems. International Journal of Fracture 38, 275–294.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Physics, Cornell University, Ithaca, NY, 14853, U.S.A.

    J. Kenneth Burton Jr.

  2. Department of Theoretical and Applied Mechanics, Cornell University, Ithaca, NY, 14853, U.S.A.

    S. Leigh Phoenix

Authors
  1. J. Kenneth Burton Jr.
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Leigh Phoenix
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Kenneth Burton, J., Leigh Phoenix, S. Superposition method for calculating singular stress fields at kinks, branches and tips in multiple crack arrays. International Journal of Fracture 102, 99–139 (2000). https://doi.org/10.1023/A:1007558018808

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1007558018808

Search

Navigation