Skip to main content
SpringerLink
Log in

Characterizing Mode II Delamination Cracks in Stitched Composites

  • Published:
International Journal of Fracture Aims and scope Submit manuscript

Abstract

This paper deals with characterizing the bridging mechanisms developed across delamination cracks by through-thickness reinforcement, using stitched carbon/epoxy laminates under mode II loading as a prime example. End Notched Flexure (ENF) tests are performed which show that stitching can provide stable crack growth. The bridging law, which characterizes the bridging action of the stitches, is deduced from both crack profile measurements and load vs. deflection curves. Consistent results are obtained from the two methods. The inferred laws imply that delamination cracks will commonly grow in conditions that are neither accurately nor properly described by linear elastic fracture mechanics. Large scale bridging calculations are required, in which the essential material property is the bridging traction law. The level of detail in which the law must be determined can be inferred from the sensitivity of predicted crack growth to variations in the law. It is recommended that the required parametric traction law be deduced in engineering practice from load vs. deflection data from the standard ENF (or similar) test, with due regard to selecting the notch size and other specimen dimensions to ensure that crack growth is stable in the test.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Aveston, J., Cooper, G.A., and Kelly, A. (1971). Single and multiple fracture, in The properties of fiber composites, Conf. Proc., National Physical Laboratory, IPC Science and Technology Press Ltd., 15.

  • Bao, G. and Suo, Z. (1992). Remarks on crack-bridging concepts. Applied Mechanics Reviews 24, 355-366.

    Article  Google Scholar 

  • Bao, G., Ho, S., Suo, Z. and Fan, B. (1992). The role of material orthotropy in fracture specimens for composites. International Journal of Solids and Structures 29(9), 1105-1162.

    Article  MATH  Google Scholar 

  • Bradshaw, F.J., Dorey, G., and Sidey, G.R. (1973). Impact resistance of carbon fiber reinforced plastics. Royal Aircraft Establishment Technical Report 72240, Farnborough, England.

    Google Scholar 

  • Budiansky, B., Hutchinson, J.W., and Evans, A.G. (1986). Matrix fracture in fiber reinforced ceramics. Journal of the Mechanics and Physics of Solids 34(2), 167-189.

    Article  MATH  ADS  Google Scholar 

  • Bueckner, H. (1979). Field singularity and related integral representations. Fracture Mechanics — I: Methods of Analysis and Solutions of Crack Problems (Edited by G.C. Sih), Noordhoff, Leyden, 239-314.

    Google Scholar 

  • Carlsson, L.A. and Gillespie, J.W. (1989). Mode-II interlaminar fracture of composites. Application of Fracture Mechanics to Composite Materials (Edited by K. Friedrich), Elsevier Science Publishers, Amsterdam, The Netherlands.

    Google Scholar 

  • Carpinteri, A. and Massabò, R. (1996). Bridged versus cohesive crack in the flexural behavior of brittle matrix composites. International Journal of Fracture 81, 125-145.

    Article  Google Scholar 

  • Chatterjee, S.N. (1991). Analysis of test specimen for interlaminar mode II fracture toughness — part 1: elastic laminates. Journal of Composite Materials 25, 470-493.

    Google Scholar 

  • Christensen, R.M. (1979). Mechanics of Composite Materials, John Wiley & Sons Inc., New York, USA.

    MATH  Google Scholar 

  • Cottrell, A.H. (1963). Mechanics of Fracture. Tewksbury Symposium on Fracture, University of Melbourne, Australia, 1-27.

    Google Scholar 

  • Cox, B.N. (1998). Constitutive model for a fiber tow bridging a delamination crack. Mechanics of Composite Materials and Structures, in press.

  • Cox, B.N. and Marshall, D.B. (1991a). The determination of crack bridging forces. International Journal of Fracture 49, 159-176.

    Google Scholar 

  • Cox, B.N. and Marshall, D.B. (1991b). Stable and unstable solutions for bridged cracks in various specimens. Acta Metallurgica et Materialia 39, 579-589.

    Article  Google Scholar 

  • Cox, B.N. and Marshall, D.B. (1994). Concepts for bridged cracks in fracture and fatigue. Acta Metallurgica et Materialia 42(2), 341-363.

    Article  Google Scholar 

  • Cox, B.N., Morris, W.L. and James, M.R. (1986). High sensitivity, high spatial resolution strain measurements in alloys and composites. Proceedings of Nondestructive Testing and Evaluation of Advanced Materials and Composites, Colorado Springs, CO, 25-39.

    Google Scholar 

  • Cox, B.N., Dadkhah, M.S., Morris, W.L. and Flintoff, J.G. (1994). Failure mechanisms of 3D woven composites in tension, compression, and bending. Acta Metallurgica et Materialia 42(12), 3967-3984.

    Article  Google Scholar 

  • Cox, B.N., Massabò, R., Mumm, D.R., Turrettini, A. and Kedward, K. (1997). Delamination fracture in the presence of through-thickness reinforcement. Proceedings of the 11th International Conference on Composite Materials, Gold Coast, Australia, 1997 (Edited by M.L. Scott), Technomic Publishing, Lancaster, Pennsylvania, 159-177.

    Google Scholar 

  • Darbyshire, H.F. (1970). Bendix Aerospace-Electronics Company Report BDX-613-144.

  • Dickinson, L. (1993). Effects of stitching parameters on mechanical properties and damage tolerance of stitched/RTM composites. Fourth NASA/DoD Conference on Advanced Composites Technology, Salt Lake City, Utah, 1993 (Edited by J.G. Davis, J.E. Gardner and M.B. Dow), NASA, 1993.

  • Dow, M.B. and Smith, D.L. (1989). Damage tolerant composite materials produced by stitching carbon fabrics. International SAMPE Technical Conference Series 21, 595-605.

    Google Scholar 

  • Dransfield, K., Baillie, C. and Mai, Y.-W. (1994). Improving the delamination resistance of CFRP by stitching — a review. Composite Science and Technology 50, 305-317.

    Article  Google Scholar 

  • Du, J., Hawkins, N.M. and Kobayashi, A.S. (1989). A hybrid analysis of fracture process zone in concrete. Fracture of Concrete and Rock. Recent Developments (Edited by S.P. Shah, S.E. Swartz and B. Barr), Elsevier Applied Science, Cambridge, UK.

    Google Scholar 

  • Fett, T. (1995). Determination of bridging stresses and R-curves from load-displacement curves. Engineering Fracture Mechanics 52(5), 803-810.

    Article  Google Scholar 

  • Fett, T., Munz, D., Yu, C-T. and Kobayashi, A.S. (1994). Determination of bridging stresses in reinforced Al2O3. Journal of the American Ceramic Society 77(12), 3267-3269.

    Article  Google Scholar 

  • Fleck, N.A. (1991). Brittle fracture due to an array of microcracks. Proceedings of the Royal Society of London A432, 55-76.

    ADS  Google Scholar 

  • Freitas, G., Fusco, T., Campbell, T., Harris, J., and Rosenberg, S. (1996). Z-fiber technology and products for enhancing composite design, AGARD Conference.

  • Guinea, G.V., Planas, J. and Elices, M. (1994). A general bilinear fit for the softening curve of concrete. Materials and Structures 27, 99-105.

    Article  Google Scholar 

  • Guo, Z.K., Kobayashi, A.S. and Hawkins, N.M. (1993). Further studies on fracture process zone for mode I concrete fracture. Engineering Fracture Mechanics 46(6), 1041-1049.

    Article  Google Scholar 

  • Hashin, Z. (1979). Analysis of properties of fiber composites with anisotropic constituents. Journal of Applied Mechanics 46, 543-550.

    MATH  ADS  Google Scholar 

  • He, M.Y. and Evans, A.G. (1992). Finite element analysis of beam specimens used to measure the delamination resistance of composites. Journal of Composites Technology and Research 14(4), 235-240.

    ADS  Google Scholar 

  • Hillerborg, A., Modeer, M. and Petersson, P.E. (1976). Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and Concrete Research 6, 773-782.

    Article  Google Scholar 

  • Horton, R.E., and McCarty, J.E. (1987). Damage tolerance of composites. Engineered Materials Handbook, Vol. 1: Composites, ASM International, Metals Park, Ohio.

    Google Scholar 

  • Jain, L.K. and Mai, Y-W. (1994). Analysis of stitched laminated ENF specimens for interlaminar mode-II fracture toughness. International Journal of Fracture 68(3), 219-244.

    Article  Google Scholar 

  • Jain, L.K. and Mai, Y-W. (1995). Determination of mode II delamination toughness of stitched laminated composites. Composites Science and Technology 55, 241-253.

    Article  ADS  Google Scholar 

  • James, M.R., Morris, W.L. and Cox, B.N. (1990). A high accuracy automated strain field mapper. Experimental Mechanics 30, 60-67.

    Article  ADS  Google Scholar 

  • Krasnov, V.I., Kuznetsov, V.A. and Maksakov, A. Yu. (1987). Automated method of transverse reinforcement of composites by short fibers. Mekhanika Kompozitnykh Materialov 3, 449-504.

    Google Scholar 

  • Marquardt, D.W. (1963). Journal of the Society for Industrial and Applied Mathematics 11, 431-441.

    Article  MATH  MathSciNet  Google Scholar 

  • Massabò, R. and Cox, B.N. (1998). Concepts for bridged mode II delamination cracks. The Journal of Mechanics and Physics of Solids, in press.

  • Mouritz, A.P. and Jain, L.K. (1997). Interlaminar fracture properties of stitched fibreglass composites. Proceedings of the 11th International Conference on Composite Materials, Gold Coast, Australia, 1997 (Edited by M.L. Scott), Technomic Publishing, Lancaster, Pennsylvania.

    Google Scholar 

  • Nanakorn, P. and Horii, H. (1996). Back analysis of tension-softening relationship of concrete. Journal of Materials, Concrete Structures, Pavements, JSCE, 265-275.

  • Rice, J.R. (1968). A path independent integral and the approximate analysis of strain concentration by notches and cracks. Journal of Applied Mechanics 35, 379-386.

    Google Scholar 

  • Rödel, J., Kelly, J.F. and Lawn, B.R. (1990). In situ measurements of bridged crack interfaces in the scanning electron microscope. The Journal of the American Ceramic Society 73(11), 3313-18.

    Article  Google Scholar 

  • Rose, L.R.F. (1987). Crack reinforcement by distributed springs. Journal of Mechanics and Physics of Solids 34, 383-405.

    Article  ADS  Google Scholar 

  • Rugg, K., Cox, B.N., Ward, K. and Sherrick, G.O. (1998). Damage mechanisms for angled through-thickness rod reinforcement in carbon-epoxy laminates. Composites, in press.

  • Sharma, S.K. and Sankar, B.V. (1995). Effects of through-the-thickness stitching on impact and interlaminar fracture properties of textile graphite/epoxy laminates. NASA Contractor Report 195042, NASA Langley, Virginia.

    Google Scholar 

  • Smith, P.J. and Wilson, R.D. (1985). Damage Tolerant Composite Wing Panels for Transport Aircraft, Boeing Commercial Airplane Company, NASA Contractor Report 3951.

  • Tikhonov, (1963). Solution of incorrectly formulated problems and the regularization method. Soviet Mathematics (Crovidence) 4, 1035-1038.

    Google Scholar 

  • Turrettini, A. (1996). An Investigation of the Mode I and Mode II Stitch Bridging Laws in Stitched Polymer Composites, Masters Thesis, Department of Mechanical and Environmental Engineering, University of California, Santa Barbara, 1996.

    Google Scholar 

  • Twomey, S. (1977). Introduction to the Mathematics of Inversion in Remote Sensing and Indirect Measurements, Elsevier, Amsterdam, The Netherlands.

    Google Scholar 

  • Xia, Z.C. and Hutchinson, J.G. (1994). Mode II fracture toughness of a brittle adhesive layer. International Journal of Solids and Structures 31, 1133-48.

    Article  MATH  Google Scholar 

  • Uchida Y., Kurihara, N., Rokugo, K. and Koyanagi, W. (1995). Determination of tension softening diagrams of various kinds of concrete by means of numerical analysis. Proceedings of the II International Conference on Fracture Mechanics of Concrete Structures, FRAMCOS 2, Zurich, Switzerland (Edited by F.H. Wittman), Aedificatio Publisher, vol. I, 17-30.

    Google Scholar 

  • Whitney, J.M. and Pagano, N.J. (1970). Shear deformation in heterogeneous anisotropic plates. Journal of Applied Mechanics 37, 1031-1036.

    Article  MATH  Google Scholar 

  • Williams, D.R., Davidson, D.L. and Lankford, J. (1980). Fatigue crack tip plastic strains by the stereoimaging technique. Experimental Mechanics 20, 134-139.

    Article  Google Scholar 

  • Wittmann, F.H., Roelfstra, P.E., Mihashi, H., Huang, Y.Y., Zhang, X.H. and Nomura, N. (1987). Influence of age of concrete as determined by means of compact tension specimens. Materials and Structures 20, 103-110.

    Article  Google Scholar 

  • Wittmann, F.H., Rokugo, K., Bruhwiler, E., Mihashi, H. and Simoni, P. (1988). Fracture energy and strain-softening of concrete as determined by means of compact tension specimens. Materials and Structures 21, 21-32.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Structural and Geotechnical Engineering, University of Genova, Via Montallegro 1, 16145, Genova, Italy; e-mail

    Roberta Massabò

  2. $Division of Engineering and Applied Sciences, Harvard University, 40 Oxford Street, Cambridge, MA, 02138, U.S.A

    Daniel R. Mumm

  3. Rockwell Science Center, 1049 Camino Dos Rios, Thousand Oaks, CA, 91360, U.S.A

    Briann Cox

Authors
  1. Roberta Massabò
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Daniel R. Mumm
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Briann Cox
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Massabò, R., Mumm, D.R. & Cox, B. Characterizing Mode II Delamination Cracks in Stitched Composites. International Journal of Fracture 92, 1–38 (1998). https://doi.org/10.1023/A:1007520324207

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1007520324207

Search

Navigation