Abstract
Different micromechanical material models were applied to simulate ductile fracture and creep damage. Ductile fracture behaviour of different specimens was analysed by using the modified Gurson model which is based on physical descriptions of micromechanisms of ductile fracture characterized by nucleation, growth and coalescence of voids. Due to the transferability of micromechanical parameters between different geometries and loading situations this model has been used to extend the fracture mechanics data base of an irradiated weld material. In contrast to the J-integral concepts the modified Gurson model can be employed to assess the initiation and propagation behaviour of a crack at the interface of two different materials like ferrite and austenite, with large gradients of the properties at the fusion line. A new material model for creep damage is a combination of the Rodin and Parks model and the viscoplastic model of Robinson. It contains a strain controlled evolution law for the damage parameter ρ. The material parameters were fitted to different creep curves. The application of the model to different specimens shows a good agreement between the predictions and the experiments.
Similar content being viewed by others
References
Argon, A.S. (1982). Recent Advances in Creep and Fracture of Engineering Materials and Structures B. Wilshire and D.R.J. Owen, Pineridge Press, Swansea, 1–52.
Ashby, M.F. and Dyson, B.F. (1984). Advances in Fracture Research', 84 — Proceedings of ICF6 (Edited by S.R. Valluri et al.) Pergamon Press, Oxford, Vol. 1, 3.
Dib, M.W. and Rodin, G.J. (1991). Acta Metallurgica et Materialia 41, 1567–1575.
Dyson, B.F. (1976). Metals Science 10, 349–353.
Garrison, Jr. W.M. and Moody, N.R. (1987). Journal of the Physics and Chemistry of Solids 48, 1035–1074.
Gurson, A.L. (1977). Journal of Engineering Materials and Technology 99, 2–15.
Hsia, K.J., Argon, A.S. and Parks, D.M. (1991). Mechanics of Materials 11, 19–42.
Hutchinson, J.W. (1983). Acta Metallurgica 31, 1079–1088.
Kachanov, L.M. (1986). Introduction to Continuum Damage Mechanics, Martinus Nijhoff, The Hague.
Klingbeil, D., Künecke, J. and Schicker, J. (1993). Report BAM-1.31 93/3, Federal Institute for Material Research and Testing (BAM) Berlin.
Koplic, J. and Needleman, A. (1988). International Journal of Solids and Structures 24, 835–853.
Kuna, M. and Sun, D.-Z. (1996). International Journal of Fracture 81, 235–258.
Lidbury, D.P.G., Sherry, A.H., Bilby, B.A., Howard, I.C., Li, Z.H. and Eripret, C. (1994). Nuclear Engineering and Design 152, 1–10.
McMeeking, R.M. and Hom, C.L. (1990). International Journal of Fracture 42, 1–19.
Mohrmann, R. PhD-thesis, University Karlsruhe, to appear.
Needleman, A. and Tvergaard, V. (1984). Journal of Mechanics and Physics of Solids 32, 461–490.
Needleman, A. and Tvergaard, V. (1987). Journal of Mechanics and Physics of Solids 35, 151–183.
Rice, J.R. (1981). Acta Metallurgica 29, 675–681.
Richelsen, A.B. and Tvergaard, V. (1994). Acta Metallurgica 42, 2561–2577.
Riedel, H. (1987). Fracture at High Temperatures, Springer Verlag, Berlin.
Robinson, D.N. (1978). A Unified Creep-Plasticity Model for Structural Metals at High Temperature, ORNL Report/TM-5969.
Rodin, G.J. and Parks, D.M. (1988). Journal of Mechanics and Physics of Solids 36, 237–249.
Rousselier, G. (1987). Nuclear Engineering and Design 105, 97–111.
Schmitt, W., Sun, D.-Z., Böhme, W. and Nagel, G. (1994). International Journal of Pressure Vessels and Piping 59, 21–29.
Schmitt, W., Sun, D.-Z., Bernauer, G. and Nagel, G. New approaches to improve the RPV material data base, to be published in Nuclear Engineering and Design.
Schmitt, W., Sun, D.-Z. and Blauel, J.G. Damage mechanics analysis (Gurson model) and experimental verification of the behaviour of a crack in a weld-cladded component, to be published in Nuclear Engineering and Design.
Sester, M., Mohrmann, R. and Riedel, H. (1997). A micromechanical model for creep damage and its application to crack growth in a 12% Cr steel, Elevated Temperature Effects on Fatigue and Fracture — ASTM STP 1297 (Edited by R.S. Piascik, R.P. Gangloff and A. Saxena), American Society for Testing and Materials, Philadelphia, 37–53.
Sun, D.-Z., Siegele, D., Voss, B. and Schmitt, W. (1988). Fatigue and Fracture of Engineering for Materials and Structures 12, 201–212.
Sun, D.-Z. and Schmitt, W. (1990). Numerical Methods in Fracture Mechanics (Edited by A.R. Luxmoore and D.R.J. Owen), Pineridge Press, Swansea, 275–286.
Sun, D.-Z., Kienzler, R., Voss, B. and Schmitt, W. (1992). Fracture Mechanics: Twenty-Second Symposium (Volume II), ASTM STP 1131 (Edited by S.N. Atluri, J.C. Newman, Jr., I.S. Raju, and J.S. Epstein), Philadelphia 368–378.
Sun, D.-Z. and Hönig, A. (1994). Localized Damage III, Computer-Aided Assessment and Control (Edited by M.H. Aliabadi, A. Carpinteri, S. Kalisky and D.J. Cartwright), CMP, Southampton, 287–296.
Sun, D.-Z., Hönig, A., Böhme, W. and Schmitt, W. (1995). Fracture Mechanics: 25th Volume, ASTM STP 1220, (Edited by F. Erdogan), Philadelphia, 343–357.
Tvergaard, V. (1984). Acta Metallurgica 32, 1977–1990.
Worswick, M.J. and Pick, R.J. (1990). Journal of Mechanics and Physics of Solids 38, 601–625.
Xia, L., Shih, C.F. and Hutchinson, J.W. (1995). Journal of Mechanics and Physics of Solids 43, 389–413.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sun, DZ., Sester, M. & Schmitt, W. Development and application of micromechanical material models for ductile fracture and creep damage. International Journal of Fracture 86, 75–90 (1997). https://doi.org/10.1023/A:1007368722374
Issue Date:
DOI: https://doi.org/10.1023/A:1007368722374