References
D. E. MOUZAKIS, F. STRICKER, R. M. üLHAUPT and J. KARGER-KOCSIS, J. Mat. Sci. 33 (1998) 2551.
A. ANTONIAZZI, A. MACCHETTA and M. SCAPIN, in "Impact and Dynamic Fracture of Polymers and Composites ESIS 19," edited by J. G. Williams and A. Pavan (1995) 245.
R. WETHERHOLD and D. E. MOUZAKIS, J. Eng. Mat. Tech., "Test Protocol for Essential work of Fracture, version 5", in press.
D. E. MOUZAKIS Idem., European Structural Integrity Society, Les Diablerets, Switzerland, 1998.
R. WALTER, K. FRIEDRICH, V. PRIVALKO and A. SAVADORI, J. Adhesion 64 (1997) 87.
J. KARGER-KOCSIS, Makromol. Chem. Macromol. Symp., in press.
Idem., Deutsche Norm DIN 53455, Bestimmung der Zugeigenschaften (Determination of Tensile Properties) also EN ISO 527-1, 1996-04, 1996.
R. J. HILL, Mech. Phys. Solids 1 (1952) 19.
Idem., ASTM E813-89e1 Standard Test Method for JIC, A Measure of Fracture Toughness, ASTM, West Conshohocken, PA, 1989; (b) Idem., ASTM E813-87 Standard Test Method for JIC, A Measure of Fracture Toughness, ASTM, West Conshohocken, PA, 1987; (c) Idem., ASTM E813-81 Standard Test Method for JIC, A Measure of Fracture Toughness, ASTM, West Conshohocken, PA, 1981.
J. S. WU, Y.-W. MAI, B. COTTERELL, J. Mat. Sci. 28 (1993) 3373.
M. Fujiyama, in "Polypropylene: an A-Z Reference," edited by J. Karger-Kocsis (Kluwer Academic, Dordrecht, 1999) p. 519.
J. Karger-Kocsis, in "Polypropylene Structure, Blends and Composites, Vol. 3: Composites," edited by J. Karger-Kocsis (Chapman & Hall, NY, 1995), p. 142.
Idem., ASTM E399-90e1 Standard Test Method for Plane Strain Fracture Toughness of Metallic Materials, ASTM, West Conshohocken, PA, 1997.
V. MATTUS, IVW Bericht 94-39 (Report 94-39) Mechanical Behavior and Failure Mechanisms of Particulate-Reinforced Polyethylene, Institut für Verbundwerkstoffe, Universität Kaiserslautern, D-67663 Kaiserslautern, Germany, 1994.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wetherhold, R.C., Mouzakis, D.E. & Friedrich, K. Effects of testing speed and heat treatment on the fracture of kaolin-reinforced high density polyethylene. Journal of Materials Science Letters 19, 179–182 (2000). https://doi.org/10.1023/A:1006786003267
Issue Date:
DOI: https://doi.org/10.1023/A:1006786003267