References
J. J. Podesta, R. C. V. Piatti and A. J. Arvia, J. Electrochem. Soc. 126 (1979) 1363.
J. Wojtowicz, “Modern aspects of electrochemistry,” Vol. 8, edited by J. O'M. Bockris and B. E. Conway (Butterworth, London, 1973) p. 47.
W. Li, X. Wang and K. Nobe, J. Electrochem. Soc. 137 (1990) 1184.
D. T. Chin, ibid. 118 (1971) 174.
H. C. Kuo and D. Landolt, Corros. Sci. 16 (1976) 915.
J. Postlethwaite and A. Kell, ibid. 119 (1972) 1351.
H. Degn, Trans. Faraday Soc. 64 (1968) 1348.
P. Russell and J. Newman, J. Electrochem. Soc. 134 (1987) 1051.
R. Alkire, D. Ernsverger and T. R. Beck, ibid. 125 (1978) 1382.
A. Atrens, Z. Werkst. tech. 15 (1984) 309.
S. A. Bradford, “Corrosion control” (Van Nostrand Reinhold, New York, 1993) p. 240.
U. Bertocci, C. Gabrielli, F. Huet, M. Keddam and P. Rousseau, J. Electrochem. Soc. 144 (1997) 1.
G. Trabanelli, “Corrosion mechanisms”, edited by F. Mansfeld (Marcel Dekker, Inc., New York, Basel, 1987) p. 119.
H. C. Kuo and D. Landolt, Electrochim. Acta20 (1975) 393.
H. Bohni, “Corrosion mechanisms” edited by F. Mansfeld, (Marcel Dekker, Inc., New York, Basel, 1987) p. 285.
Rights and permissions
About this article
Cite this article
Wilmott, M. Oscillation of Potential and Current During the Initiation of Crevice Corrosion on Carbon Steel. Journal of Materials Science Letters 17, 1071–1075 (1998). https://doi.org/10.1023/A:1006667613086
Published:
Issue Date:
DOI: https://doi.org/10.1023/A:1006667613086