References
C. G. Mckamey, J. H. Devan, P. F. Tortorelli and V. K. Sikka, J. Mater. Res. 6 (1991) 1779.
G. L. Chen, Y. D. Huang, W. Y. Yang and Z. Q. Sun, in “High temperature ordered intermetallic alloys V,” vol. 288, Pittsburgh, 1993, edited by I. Baker, R. Darloia, J. D. Whittenberger and M. Yoo (Mater. Res. Symp. Proc.) p. 885.
S. C. Deevi, V. K. Sikka and C. T. Liu, Progress in Materials Science 42 (1997) 177.
E. R. Slaughter and S. K. Das, in “Rapid solidification processing: principle and technologies II,” edited by R. Mehrabian, B. H. Kear and M. Cohen (Claitor's Pub. Div., Baton Rouge, LA, 1980) p. 354.
C. G. Mckamey, J. A. Horton and C. T. Liu, J. Mater. Res. 4 (1989) 1156.
C. C. Koch, in “High temperature ordered intermetallic alloys,” vol. 39, Pittsburgh, 1985, edited by C. C. Koch, C. T. Liu and N. S. Stoloff (Mater. Res. Symp. Proc., PA, 1985) p. 397.
C. T. Liu, E. H. Lee and C. G. Mckamey, Scripta Met. 23 (1989) 875.
C. T. Liu, C. G. Mckamey and E. H. Lee, ibid. 24 (1989) 385.
C. G. Mckamey and C. T. Liu, in Proceedings of ADVMA/91, 1st International Symposium on Environmental Effects on Advanced Materials, Houston, TX, 1992, edited by R. D. Kane (National Association of Corrosion Engineers) Paper 17-1.
R. E. Hook, D. W. Johnson and P. J. Erfort, Presented at ASM Materials Week, Orlando, FL, October 7, 1986, available in handout form from R. E. Hook (Armco Research and Technology, Middletown, OH).
Y. D. Huang, Ph.D. Dissertation (1994).
K. Rabinovich, M. V. Markushev and M. Y. Murashkin, Metal Science and Heat Treatment 39 (1997) 172.
D. Doherty, D. A. Hughes, F. T. Humphreys, J. J. Jonas and D. Juul Jensen, Mater. Sci. Eng. A238 (1997) 219.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Huang, Y.D., Yang, W.Y. & Sun, Z.Q. Effect of Thermomechanical Processes on Room-temperature Mechanical Properties of Fe3Al-based Alloys. Journal of Materials Science Letters 17, 1781–1784 (1998). https://doi.org/10.1023/A:1006616417203
Issue Date:
DOI: https://doi.org/10.1023/A:1006616417203