Abstract
The subject of this paper is the control of computer-simulated drying processes for the purpose of their optimization. The simulated processes are carried out in such a way that the drying-induced stresses never exceed the stress limit. This paper presents results of a mechanically admissible drying process on the example of a prismatic bar dried convectively, using the theory for drying of capillary-porous materials. The procedure of designing the safe drying processes, in which the destruction of dried materials no longer proceeds, is presented.
Similar content being viewed by others
References
Fisher, D., Espidel, Y., Huerta, M., Randall, L. and Goldman, J.: 1995, Phase behavior visualization for foamy oils using magnetic resonance imaging, 1996/97-6, Petroleum Recovery Institute-INTEVEP Joint Report, Calgary, Canada.
Morriss, C. E., Freedman, R., Straley, C., Johnston, M., Vinegar, H. J. and Tutunjian, P. B.: 1994, Hydrocarbon saturation and viscosity estimation form NMR logging in the Belridge Diatomite, SPWLA 35th Annual Logging Symposium, Paper C, June 19-22, pp. 1-24.
Maini, B., Sheng, J. and Nicola, F.: 1995, Laboratory investigation of foamy oil flow for improved primary production, Draft Final Report SSC N_ XSG94-00145-(608), Petroleum Recovery Institute, Calgary, Canada.
Acevedo, S., Escobar, G., Huerta, M., Piña, G. and Hernández, Z.: 1996, Gas trapping mechanism for foamy oil behavior: 3D network of oil components in extra-heavy crude, submitted for publication.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kowalski, S.J., Rybicki, A. Computer Simulation of Drying Optimal Control. Transport in Porous Media 34, 227–238 (1999). https://doi.org/10.1023/A:1006521726842
Issue Date:
DOI: https://doi.org/10.1023/A:1006521726842