Skip to main content
SpringerLink
Log in

Conditioning of Oily Sludge with Alum

  • Published:
Environmental Monitoring and Assessment Aims and scope Submit manuscript

Abstract

Sludge dewatering is a process whereby water is removed from sludge so as to reduce its volume and alter its physical state from semisolid to damp solid. This physical change reduces the volume of sludge considerably and therefore the cost of disposal. The degree of reduction of sludge volume or dewatering is a function of the characteristics of sludge and the type of dewatering device. Sludge characteristics such as specific resistance, capillary suction time(CST), filter yield and solid content can be determined in the laboratories. Knowledge of these characteristics with different dosages of sludge conditioners helps in effective dewatering and sludge handling operations.

Oil and grease have an affinity for suspended solids. Experiences show that the presence of oil in wastewater results in poor substrate utilization causing less aerobic treatment and subsequently hinder settling and dewatering processes. Sludge samples with different oil contents varying from 1.8% to 8.0% by weight have been examined in the laboratory to find out their specific resistance, capillary suction time and filter yield. Alum was used as a conditioner. Different dosages of alum varying from 2% to 12% by weight were used to determine the optimum chemical dosage for varying oil contents. Buchner funnel apparatus, filter leaf apparatus and capillary suction time test apparatus were used to determine the dewatering characteristics specific resistance, filter yield and capillary suction time respectively.

Addition of alum decreases the specific resistances and capillary suction times of oily sludges rapidly upto 4% dosages. Alum dosages beyond 4% only increase the solids content in the sludge cake and increase the sludge volume to be handled. The total suspended solids of filtrate decrease with alum dosage. The correlations between dewatering characteristics were studied. A correlation between CST and specific resistance to filtration was established. CST can be measured easily and quickly in the laboratories. Using the CST and the correlation a quick prediction on dewaterability can be established.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • ADEMILUYI, J.O.(1986), “Limitations of Sludge Filtration Theory at Constant Vacuum Pressure,” Effluent and Water Treatment Journal, January 1986, pp. 19–22.

  • AGERBAEK, M.L. and Keiding, K.(1993). On the Origin of Specific Resistance to Filtration. Water Science and Technology, Vol.28,No,1, pp.159–168.

    Google Scholar 

  • BASKERVILLE, R.C. and GALE, R.S.(1968). A Simple Automatic Instrument for Determining the Filterability of Sewage Sludge. Journal of the Institute of Water Pollution Control, 1968.

  • CARMAN, P.C.(1938), “Fundamental Principles of Industrial Filtration”, Transactions, Institution of Chemical Engineers, Oct, 1938.

  • CHRISRENSEN, G.L. and DICK, R.I.(1985). Specific Resistance Measurements: Nonparabolic Data. Journal of Environ.Eng.Div., ASCE.III, 1985.

  • CHUA SOH ENG (1989). The Oil and Grease Problem in Sewage Treatment. Journal of the Institution of Engineers, Singapore, Vol.29,No.1, April 1989.

  • COAKLEY, P., and JONES, B.R.S. (1956). “Vacuum Sludge Filtration”, Sewage Industrial Works, Vol 28.

  • EDEN, G.C. (1983), “Modern Trends in Sludge Management: Sludge Conditioning”, Water Science and Technology Journal, Vol.15, Capetown, pp.37–48.

    Google Scholar 

  • GALE, R.S. and BASKERVILLE, R.C. (1970). Polyelectrolytes in the Filtration of Sewage Sludges. Filtrn and Separn, 7, pp.37–44 and pp.47–52.

    Google Scholar 

  • LAWLER, D.F., CHUNG, Y. J., IIWANG, S. and HULL, B. A. (1986). Anaerobic Digestion: Effects on Particle Wsize Distribution. Jounal of WPCF, Vol 58,Number 12, pp1107–1117.

    Google Scholar 

  • MARTEL, C.J.(1993). Fundamentals of Sludge Dewatering in Freezing Beds, Water Science and Technology, Vol 28,No.1, pp.29–35.

  • NOVAK, J.T, and Knocke, W.R. (1987). “Discussion on Specific Resistance Measurements: Nonparabolic Data.” G.L. Christensen and R.I. Dick., J/Environ. Eng. Div. ASCE 113.

  • VESILIND, P.A. (1988). Capillary Suction Time as a fundamental measure of sludge dewaterability. Journal of WPCF, Vol.60,No.2, pp.215–220.

    Google Scholar 

  • WILLIAM. R. KNOCKE., TERRY.L. ZENTKOVICH.,(1986), “Effects of Mean Cell Residence Time and Particle Size Distribution on Activated Sludge Vacuum Dewatering Characteristics”, Journal WPCF, Vol.58,Number 12, pp.1118–1123.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Civil and Structural Engineering, Nanyang Technological University, Singapore

    Joo Hwa Tay & S. Jeyaseelan

Authors
  1. Joo Hwa Tay
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Jeyaseelan
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Tay, J.H., Jeyaseelan, S. Conditioning of Oily Sludge with Alum. Environ Monit Assess 44, 263–273 (1997). https://doi.org/10.1023/A:1005792725319

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1005792725319

Keywords

Search

Navigation