Abstract
A method is suggested for optimizing the design and operating parameters of screw powder compactors.
Similar content being viewed by others
REFERENCES
Akiyama, T., Miyamoto, Y., Yamanaka, N., and Zhang, J.Q., Densification of Powders by Means of Air, Vibratory and Mechanical Compactions, Powder Technol., 1986, vol. 46, p. 173.
Kapranova, A.B., Murashov, A.A., and Zaitsev, A.I., Sovremennye metody opisaniya protsessa uplotneniya poroshkoobraznykh materialov (Present Ways of the Description of Powder Compaction), Available from TsNIITENeftekhim, 1993, Yaroslavl, no. 9NKh-93.
Gruzdev, I.E., Mirzoev, R.G., and Yankov, V.I., Teoriya shnekovykh ustroistv (Theory of Screw Apparatuses), Leningrad: Leningr. Gos. Univ., 1978.
Gersevanov, N.M., Osnovy mekhaniki gruntovoi massy (Fundamentals of Soil Mechanics), Moscow: Stroiliteratura, 1937.
Saikai, M., On the Trajectory of a Small Particle Steadily Passing through a Sinusoidaly Curved Channel, Trans. Jpn. Soc. Mech. Eng. B, 1990, vol. 6, no. 528, p. 2180.
Murashov, A.A., Kapranova, A.B., and Zaitsev, A.I., Mathematical Model of Powder Motion and Compaction in a Screw Compactor, in Tekhnika i tekhnologiya sypuchikh materialov: Mezhvuzovskii sbornik nauchnykh trudov (Processes and Apparatuses for Granular Materials: Collection of Scientific Works of Higher Educational Institutes), Ivanovo: Ivanov. Khim.-Tekhnol. Inst., 1991, p. 32.
Kapranova, A.B. and Zaitsev, A.I., Powder Compaction in a Screw Apparatus: A Mathematical Model Taking into Account the Slip Effect, Matematicheskie metody v khimii i khimicheskoi tekhnologii: tezisy dokladov IX Mezhdunarodnoi nauchnoi konferentsii (Proc. IX Int. Conf. on Mathematical Methods in Chemistry and Chemical Engineering), Tver, 1995, vol. 2, part 2, p. 147.
Kapranova, A.B., Zaitsev, A.I., and Nikitina, T.P., Calculating the Degree of Compaction of a Powder in a Screw Compactor Taking into Account Slip and Friction, Teor. Osn. Khim. Tekhnol., 2000, vol. 34, no. 6, p. 649.
Kapranova, A.B. and Zaitsev, A.I., Determining the Slip Coefficient in the Compaction of Powders by an Auger Machine, Teor. Osn. Khim. Tekhnol., 1996, vol. 30, no. 5, p. 548.
Kapranova, A.B. and Zaitsev, A.I., Calculation of the Capacity of a Screw Compactor, “Vibrotekhnologiya-96”: tezisy dokladov VI nauchnoi shkoly stran SNG po mekhanicheskoi obrabotke dispersnykh materialov i sred (“Vibrotekhnologiya-96”: Proc. VI CIS Workshop on the Mechanical Treatment of Disperse Materials and Media), Odessa, 1996, part 1, p. 50.
Torner, R.V., Teoreticheskie osnovy pererabotki polimerov (Theoretical Foundations of Polymer Processing), Moscow: Khimiya, 1977.
Tadmor, Z. and Gogos, C.G., Principles of Polymer Processing, New York: Wiley, 1979. Translated under the title Teoreticheskie osnovy pererabotki polimerov, Moscow: Khimiya, 1984.
Razmolodin, L.P., Tarasov, V.M., and Zhestkova, T.Ya., Experimental Study of the Compaction of a Granular Material in a Tapered-Screw Apparatus, Tekhnologiya sypuchikh materialov: tezisy dokladov Vsesoyuznoi nauchno-tekhnicheskoi konferentsii “Khimtekhnika-89” (Processing of Granular Materials: Proc. All-Union Res. Eng. Conf. “Khimtekhnika-89”), Yaroslavl, 1989, vol. 2, p. 194.
Razmolodin, L.P. and Tarasov, V.M., Compaction of Granular Materials in Screw Apparatuses, Mekhanika sypuchikh materialov: tezisy dokladov V Vsesoyuznoi nauchnoi konferentsii (Proc. V All-Union Conf. on the Mechanics of Granular Materials), Odessa, 1991, p. 202.
Kapranova, A.B., Murashov, A.A., and Zaitsev, A.I., Opredelenie fiziko-mekhanicheskikh parametrov uplotneniya poroshkov i kharakteristik dispersnykh materialov (Mechanical Parameters of Powder Compaction and Properties of Disperse Materials), Available from TsNIITENeftekhim, 1995, Yaroslavl, no. 13NKh-95.
Grigor'ev, A.M., Vintovye konveiery (Screw Conveyors), Moscow: Mashinostroenie, 1972.
Kapranova, A.B., Zaitsev, A.I., and Oborin, A.V., Selection of the Optimal Parameters of the Worm Set-Up for Powder Densification, “CHISA'96,”the 12th Int. Congr. of Chemical Engineering, Chemical Equipment, Design and Automation, Prague, 1996, p. 49.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kapranova, A.V., Zaitsev, A.I. & Nikitina, T.P. Design of a Screw Powder Compactor. Theoretical Foundations of Chemical Engineering 35, 90–94 (2001). https://doi.org/10.1023/A:1005233205559
Issue Date:
DOI: https://doi.org/10.1023/A:1005233205559