REFERENCES
P. D. Odesskii and I. I. Vedyakov, Low-Carbon Steel for Metallic Structures [in Russian], Intermet Engineering Joint Venture, Moscow (1999).
N. P. Lyakishev, S. P. Efimenko, and S. I. Tishaev, “Deformation and heat hardening of rolled stock from structural steel: problems of production and use,” Izv. Akad. Nauk SSSR, Met., No. 3, 3–8 (1991).
Metal and Technical Progress: Proc. All-Union Sci. Conf. [in Russian], Metallurgiya, Moscow (1987).
M. L. Bernshtein and P. D. Odesskii, “High-strength constructional steels,” in: Itogi Nauki i Tekhniki, Ser. Metalloved. Term. Obrab. Met., Vol. 11 [in Russian], VINITI, Moscow (1977), pp. 5–66.
M. L. Bernshtein, Structure of Deformed Metals [in Russian], Metallugiya, Moscow (1977).
M. L. Bernshtein, S. V. Dobatkin, L. M. Kaputkina, and S. D. Prokoshkin, Hot Deformation Diagrams, Structure and Properties of Steels, A Handbook [in Russian], Metallurgiya, Moscow (1989).
V. I. Bol'shakov, K. F. Starodubov, and M. A. Tylkin, Heat Treatment of High-Strength Constructional Steel [in Russian], Metallurgiya, Moscow (1972).
K. F. Starodubov, I. G. Uzlov, V. Ya. Savenkov, et al., Heat Treatment of Rolled Stock [in Russian], Metallurgiya, Moscow (1970).
S. A. Madat'yan, “General tendencies of the production and use of conventional and stressed reinforcing rods,” Beton Zhelezobet., No. 1, 2–5 (1997).
P. D. Odesskii and V. T. Chernenko, “High-strength rolled shapes with structural anisotropy,” Metalloved. Term. Obrab. Met., No. 8, 13–18 (1992).
P. D. Odesskii, G. M. Krasovskaya, and A. A. Zborovskii, “Provision of high resistance to brittle fracture in reinforcing rods A 500C of the new generation with a structure of a natural composite,” Materialovedenie, No. 11, 49–55 (1999).
F. F. Azhogin, Corrosion Cracking and Protection of High-Strength Steels [in Russian], Metallurgiya, Moscow (1974).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Odesskii, P.D., Tishaev, S.I. & Bakhteeva, N.D. In-Flow Hardening of Low-Carbon Steel. Metal Science and Heat Treatment 42, 370–372 (2000). https://doi.org/10.1023/A:1004814105366
Issue Date:
DOI: https://doi.org/10.1023/A:1004814105366