REFERENCES
I. L. Perlin and L. F. Raitberg, The Theory of Metal Pressing [in Russian], Metallurgiya, Moscow (1975).
V. M. Segal, V. I. Reznikov, V. I. Kopylov, et al., Processes of Plastic Structure Formation [in Russian], Nauka i Tekhnika, Kiev (1994).
N. A. Akhmadeev, R. Z. Valiev, V. I. Kopylov, and R. R. Mulyukov, “Formation of submicrograin structure in copper and nickel with the use of intense shear deformation,” Metally, 5, 96–101 (1992).
R. Z. Valiev and R. K. Islamgaliev, “Structure and mechanical behavior of ultrafine-grain metals and alloys subjected to intense plastic deformation,” Fiz. Met. Metalloved., 85, Issue 3, 166–177 (1998).
Yoshinori Iwahashi and Zenji Horita, “Minoru Nemoto and Ntterence G,” Acta Mater., 9, 3317–3331 (1998).
L. L. Popov, R. Z. Valiev, I. Yu. Pyshmintsev, et al., “Formation of structure and properties in technically pure titanium with nanocrystalline structure after deformation and subsequent heating,” Fiz. Met. Metalloved., 83, Issue 5, 127–133 (1997).
H. Gleiter, “Nanostructured materials: State of the art and perspectives,” in: NANO'94: 2nd Int. Conf., Stuttgart (1994).
Kh. V. Prozorov, Pressing of Steels [in Russian], Mashgiz, Moscow (1966).
L. N. Moguchii, “Some concepts of the theory of shells as applied to the process of extrusion (pressing),” in: Shaping Processes for Metals and Alloys, Collected Works [in Russian], Nauka, Moscow (1971).
G. A. Salishchev, O. R. Valiakhmetov, R. M. Galeev, and S. P. Malysheva, “Formation of submicrocrystalline structure in titanium under plastic deformation and its effect on the mechanical properties,” Metally, No. 4, 86–91 (1996).
V. P. Romanovskii, A Handbook on Cold Forging [in Russian], Mashinostroenie, Leningrad (1979).
A. P. Grudev, Yu. V. Zil'berg, and V. G. Gilin, Friction and Lubrication in Pressure Treatment of Metals, A Handbook [in Russian], Metallurgiya, Moscow (1982).
D. M. Zakirov, Yu. A. Lavrichenko, V. Yu. Sholom, and A. N. Abramov, “New technological lubricating materials used in the production of fasteners,” Mashinostroitel', No. 11, 34–37 (1996).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Raab, G.I., Valiev, R.Z. Obtaining a Nanostructure in Titanium by Equal-Channel Angular Pressing. Metal Science and Heat Treatment 42, 361–365 (2000). https://doi.org/10.1023/A:1004810004457
Issue Date:
DOI: https://doi.org/10.1023/A:1004810004457