Abstract
Commercial production of copper by continuous casting in a wheel-and-band machine, with suitable modifications to induce high undercooling, is considered. Impurities control to a large extent the microstructure and mechanical properties of the ingot. Suitable solute additives in the molten alloy to achieve constitutional supercooling during solidification have been analyzed, with particular emphasis on the presence of lead. Experimental information on the Cu-O-Pb phase diagram has been revised and modeling of the microstructure evolution as a function of several casting parameters is being presented.
Similar content being viewed by others
References
M. S. Stanford, Copper 1 (1967) 11.
J. Niemela, Calphad 10 (1986) 77.
Y. A. Chang and K.-C. Hsieh, “Phase Diagrams of Ternary Copper-Oxygen-Metals Systems” (ASM, Metals Parck, Ohio, 1989) pp. 95–106.
Metals Handbook, Vol. 8, Metallography, Structures and Phase Diagrams, 8th ed. (ASM, Metals Park, Ohio, 1973).
M. F. Abadir, A. M. Gadalla and Y. M. Elagamawi, Trans. Br. Ceram. Soc. 75 (1976) 68.
E. Gebhardt and W. Obrowski, Z. Metallk. 45 (1954) 332.
A. M. Gadalla, Sci. Ceram. 3 (1967) 179.
J. Gerlach, H. J. Kleibeler and F. Pawlek, Metall. 21 (1967) 1115.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Clavaguera-Mora, M.T., Comas, C., Touron, J.L. et al. Solidification study of Cu-based alloys obtained by continuous casting. Journal of Materials Science 34, 4347–4350 (1999). https://doi.org/10.1023/A:1004648129388
Issue Date:
DOI: https://doi.org/10.1023/A:1004648129388